Baby seat restraints in 130

**abaddonxi** · 14th November 2008, 09:06 PM

Originally Posted by BilboBoggles

I have dealer fitted restraint points - 3 that mount into the wheel box and floor in the rear. The company that "engineered" them is Vehiquip in FermTreeGully. They supply an engineering certificate on request. Cost $270 for All three points.

Thanks for that.

Pics would be great.

Cheers
Simon

**Koukandowie Brangus** · 15th November 2008, 09:07 AM

Originally Posted by Gillie

Here is some pics. I only put in two of the three restraints but only used the middle one. All bolts including restraint bolts have crush tubes in them. Any queries let me know I can email larger sized pics if requested.

Hey Gillie can you give me a run down on how you fitted the anchor points with the crush spacers, i have all the gear but was just wondering how others were doing it. Did you just drill out the tube on the front to fit the spacers inside?

**Hugh42732** · 10th March 2011, 03:50 PM

Hi, I have three restraints fitted simmilar to the pictures before but with angle iron instead of RHS . Fabricated, fitted with blue plate and associated paperwork by Mobility Modification Services in Townsville for $450

**easo** · 10th March 2011, 06:17 PM

Well gillies bar has been fitted to sallyanne for 2 years now and is still doing a sterling job. We now have 6 car seats, 3 in each of our cars and there is no need to switch them around anymore.

Regards Easo

Thread: Baby seat restraints in 130

Thread Tools

Bookmarks

Bookmarks

Posting Permissions