Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: DII td5 alarm wont disarm... urgent!!!!

  1. #1
    Join Date
    Oct 2006
    Location
    kinross, Perth, WA
    Posts
    1,573
    Total Downloaded
    0

    DII td5 alarm wont disarm... urgent!!!!

    Guys urgent help required..

    alarm has packed up

    replaced battery in fob already but alarm still wont talk to fob

    any ideas what could of caused it.. just been on road for 2 hours.. and all was good, went to lock it.. it wouldnt so armed it with the key... now i cant disarm!

    meant to be going out shortly

    Thanks in advance

    Steve

  2. #2
    mike 90 RR Guest
    Quote Originally Posted by 5teve View Post
    Guys urgent help required..

    alarm has packed up

    replaced battery in fob already but alarm still wont talk to fob

    any ideas what could of caused it.. just been on road for 2 hours.. and all was good, went to lock it.. it wouldnt so armed it with the key... now i cant disarm!

    meant to be going out shortly

    Thanks in advance

    Steve
    I think that in your "owners hand book manual" .... there is instructions on how to reset the alarm .... Something about stick key in ignition and turn key on & off a certain amount of times

    Mike

  3. #3
    Rayngie Guest
    pretty much same thing happend to me this morning, i stopped at a service station, did'nt lock the car but when i came back the alarm went off as i opened the door, then the key fob would'nt talk to the car, i was'nt able to lock or unlock it, alarm kept going off etc, tried the key in the lock, alarm went off again, all i could do was wait , after about 5 mins the fob and the car made up and all's been well...very weird and very annoying.

    Hope you got going?

    Ray

  4. #4
    Join Date
    Jan 1970
    Location
    Just North of Cairns
    Posts
    642
    Total Downloaded
    0

    Car Alarm

    This is spooky, mine also would not disarm this morning.
    This was in Melbourne. Is the military using some new kind of weapon?? Finally was able to disarm it with my wifes key fob.

    Cheers,

    Ken

  5. #5
    Join Date
    Oct 2006
    Location
    kinross, Perth, WA
    Posts
    1,573
    Total Downloaded
    0
    thanks guys...

    leaving it hasnt worked... cant communicate with the nanocom... and its a public holiday here so cant get an EKA code whcih is what i need to get the motor moving..

    any more ideas?

    Thanks

    Steve

  6. #6
    mike 90 RR Guest
    Quote Originally Posted by 5teve View Post
    thanks guys...

    leaving it hasnt worked... cant communicate with the nanocom... and its a public holiday here so cant get an EKA code whcih is what i need to get the motor moving..

    any more ideas?

    Thanks

    Steve
    Steve ... Did you do the .....

    I think that in your "owners hand book manual" .... there is instructions on how to reset the alarm .... Something about stick key in ignition and turn key on & off a certain amount of times

    This is suppose to be the manual way of talking to the alarm ... as your alarm has a general lock mode and a DEEP lock mode (I think)

    If you don't have the procedure ... then maybe others have it??

    Mike


  7. #7
    Join Date
    Oct 2006
    Location
    kinross, Perth, WA
    Posts
    1,573
    Total Downloaded
    0
    Steve ... Did you do the .....

    I think that in your "owners hand book manual" .... there is instructions on how to reset the alarm .... Something about stick key in ignition and turn key on & off a certain amount of times

    This is suppose to be the manual way of talking to the alarm ... as your alarm has a general lock mode and a DEEP lock mode (I think)

    If you don't have the procedure ... then maybe others have it??

    Mike
    Sorry Mike

    the thing you are referring to i think, is done via the door key and it required a 4 digit code to unlock. i didnt have the code, but somehow managed to get the nanocom talking to the alarm computer and managed to change the code to something i can remember. apparently the keyfobs are not programmed according to a sync check via the nanocom. however if i check the keyfob codes via the nanocom they are registered.

    i managed to disarm everything and then changed the trailer plug (as thats been playing up cause of corrosion) and all was ok when we dropped the boat in the water parked up locked it via the fob came back unlocked it etc etc ... was all working fine. put the boat on the drive.. unhitched it, parked the car and tried to lock it.. no go.. wasnt happy. so i have had to keylock it again.

    so i am at a bit of a loss.. its almost as though something is interfering with it. its detecting all keyfob button presses but doesnt recognise them as being from programmed fobs...

    any ideas? thanks for the help so far too guys

    Steve

  8. #8
    mike 90 RR Guest
    The battery power in the key is OK?? .... I know this will sound dumb .... but I remember someone posting that his keyFob was playing up around a Amcal chemist .... something to do with another frequecy in the area was interfering ..... So does this only happen at your home???


    My bro has the 1999 / 2000 disco and he has had the same occasional drama
    I "believe" he resolved it via that key & code bit that you know of

  9. #9
    Join Date
    Oct 2006
    Location
    kinross, Perth, WA
    Posts
    1,573
    Total Downloaded
    0
    yep replaced with brand spanking battery.. both keys dont work so i think its an alarm issue..

    the amcal chemist thing is an alarm / immobiliser issue where something in the chemists blocks them from being disarmed. it seems very similar to that! no amcals at my house tho

    i'll keep playing and see if i can solve it... maybe its some solar flares playing us all up today?

    Thanks

    Steve

  10. #10
    mike 90 RR Guest
    this one speaks of the same problem ....

    http://www.aulro.com/afvb/technical-...ghlight=keyfob

    Mike

Page 1 of 2 12 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!