Disco1, Disco2, defender, P38 interchangable parts.

**Slunnie** · 23rd January 2010, 04:43 PM

Originally Posted by Redback

Just for some extra info, the D2 stud is 14mm and the stud pattern of 120PCD is the same as;

P38a

Disco 3 & 4

RRS

09/10 Holden Commodore

Earlier model Commodores have 12mm studs but the same PCD.

Also and can't be 100% on this, the 120PCD is on these as well

BMW X3 & X5

VW Toureg & late model Transporters

Baz.

the centralising spigots are different however. This means that despite the same PCD and stud sizes, that wheels are not necessarily interchangable between all of the above. You can adapt in some casese with centralising runs (hubcentrics?). Also note that there are some stud length variations which will have various implications eg BMW rims on to D3/D4/RRS does not use the same number of threads as factory rims - there are implications in the wheels/tyre modifications guideline regarding this. Likewise the offsets vary and again there are comments re this in the modification guidelines.

**Disco_owner** · 23rd January 2010, 04:48 PM

incase you have a D1 Centre Console for a manual in your possession, I'll be very much interested in one.

**locorr** · 31st July 2011, 09:39 AM

Would anyone know if the B pillar is the same on a D2 as a D1.
I have a damaged D2 and a D1 wreck.

**Alex 110** · 24th June 2012, 10:26 AM

Defender front springs (300tdi anyway) fit Disco 1 & Disco 2 rear.
AFAIK they also fit D2 front (although thicker wire (220lb/in I think) - good to uprate for the heavy bullbar, winch, etc) not sure about D1 front.

**Tins** · 29th December 2014, 12:26 PM

Originally Posted by locorr

Would anyone know if the B pillar is the same on a D2 as a D1.
I have a damaged D2 and a D1 wreck.

I just looked at the two side by side; the pillars appear to be very similar, but the lock striker is a completely different type, so, unless you are very competent with the welder, or use a D1 front door.....

**RRT** · 7th June 2019, 05:22 PM

Defender front springs (30+ Reply to Thread0tdi anyway) fit Disco 1 & Disco 2 rear.
AFAIK they also fit D2 front (although thicker wire (220lb/in I think) - good to uprate for the heavy bullbar, winch, etc) not sure about D1 front.

Does this sound right, want to put the bags back on the TD5 so can I use the rear springs - pale blue colour - at the front as I have a MCC alloy bar and warn 9500 to fit

**RRT** · 7th June 2019, 05:35 PM

This is what is missing from the above !

**twr7cx** · 11th June 2019, 08:59 AM

Originally Posted by andymach23

Are P38 hubs the same as on the D2 by any chance?

Front drive shaft output/hub seals between the two are the same part.

**Fausto79** · 14th June 2019, 11:09 AM

for what it's worth, after finding the numbers of my rear springs it turns out they are dobinson medium duty springs for a D2, which equates to slightly more HD on a D1. but they fit. the fronts i have normal D1 medium duty.

Thread: Disco1, Disco2, defender, P38 interchangable parts.

Thread Tools

D2 rear to D2 front then?

are the springs from front and rear of the D2 the same only the thickness changes?

Bookmarks

Bookmarks

Posting Permissions