Page 3 of 3 FirstFirst 123
Results 21 to 26 of 26

Thread: Defender 2008

  1. 6th March 2009, 10:06 AM #21
    BilboBoggles
    BilboBoggles is offline Master Subscriber
    Join Date
    Oct 2008
    Posts
    917
    Total Downloaded
    0
    I've heard that there are handbrake issues on some of the TD4's, and that quite possibly they might be adjusted too tight. I've seen a handbrake drum get extremely hot on a range Rover where the linkage had been damaged. Could that be a cause?. I checked mine on a 40C day after a 100k drive and it was the same temp on the floor/tunnel as the rest of the body.
    Reply With Quote Reply With Quote
  2. 6th March 2009, 08:31 PM #22
    DeeJay's Avatar
    DeeJay
    DeeJay is offline TopicToaster
    Join Date
    Jan 1970
    Location
    Wheelers Hill, Melbourne
    Posts
    4,085
    Total Downloaded
    0
    After I had my County rebuilt we experienced a hot floor, but more like 70 degrees.
    It turned out to be a tiny pinhole in the new exhaust. You could neither see nor hear it, but running your hand between the floorboards & exhaust, you could feel it with the engine running.

    BTW I had a Mazda capella in the early 70's & you could'nt hold your hand on the gearbox. Every car I've had since has been the same- curious bugger aint I ?
    Reply With Quote Reply With Quote
  3. 6th March 2009, 08:53 PM #23
    Huwmungus
    Huwmungus is offline Fossicker
    Join Date
    Apr 2007
    Location
    Cargo NSW
    Posts
    37
    Total Downloaded
    0
    Welcome to Land Rovers!!

    I have a 300tdi 130 that gets a hot floor on a long trip. When we were kids we had a 110 county V8 and the black strip behind the front seats would get so hot you couldn't put your bare feet on it. the 130 doesn't get as hot and seems to be better now I have it running cooler but that wouldn't be the problem in the new one - just the design not being able to get rid of the hot air from exhaust, radiator, air con condensor etc.
    Reply With Quote Reply With Quote
  4. 6th March 2009, 09:28 PM #24
    lambrover's Avatar
    lambrover
    lambrover is offline Wizard
    Join Date
    Jan 2008
    Location
    Sydney, West
    Posts
    1,241
    Total Downloaded
    0
    to rid heat from the exhaust system you can have it ceramic coated, apparently you can put your hand on the pipe pretty well straight after its turned off.
    Reply With Quote Reply With Quote
  5. 6th March 2009, 09:49 PM #25
    POD's Avatar
    POD
    POD is offline ChatterBox Subscriber
    Join Date
    Jun 2008
    Location
    Drouin East, Vic
    Posts
    2,781
    Total Downloaded
    0
    This thread takes me back to my SWB series III about 22 years ago; I had a case of Stanley screwdrivers in the box under the passenger seat- the handles all melted!
    Reply With Quote Reply With Quote
  6. 7th March 2009, 12:59 AM #26
    Mikes defender
    Mikes defender is offline Fossicker
    Join Date
    Dec 2007
    Posts
    94
    Total Downloaded
    0
    Quote Originally Posted by rick130 View Post
    Have a read of the thread in full, or more specifically my second post above.

    another link http://www.aulro.com/afvb/technical-...tml#post583935

    and who convinced me it was ok in a road vehicle http://www.aulro.com/afvb/technical-...tml#post445170
    Rick130,

    Thanks for the above info. I might give it a go on my td5. (ill see what the access is like first!) Cheap Hp, plus less burns when changing the oil filter!!

    Have fun

    Mike
    Reply With Quote Reply With Quote
Page 3 of 3 FirstFirst 123
« Removing sheared bolt (aka i'm screwed) (added picture) | TD5 starter motor quick fix »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!