Thread: Disco rims turned around

Originally Posted by 4x4x2

Hi
I see a few guys on here run steel disco rims around the other way
has anybody had any problems with this
i guess you have to do the tyre pressure on the inside

Yes people have flipped them, but first they get the centre cut, flipped and re-welded, so the tyre valve is on the out side etc
You'd probably be looking at $80-$120 per rim
Maybe cheaper

CHEERS TIM.

Originally Posted by long stroke

Yes people have flipped them, but first they get the centre cut, flipped and re-welded, so the tyre valve is on the out side etc
You'd probably be looking at $80-$120 per rim
Maybe cheaper

CHEERS TIM.

I had some disco rims flipped last year 80mm backspace $40 a wheel

Originally Posted by long stroke

Yes people have flipped them, but first they get the centre cut, flipped and re-welded, so the tyre valve is on the out side etc
You'd probably be looking at $80-$120 per rim
Maybe cheaper

CHEERS TIM.

Ever had any done?

The valve hole must be filled and redrilled, if you flipped the outer so the valve hole was on the outside, its would be back where it was

Turn all the wheels over so dem valves point inwards. Den swap da wheels from side to side. Den all da valves will be pointing out again! Simple!

Well, dat's da way we'd do it here in Ireland...

Shamus O'Leo, ILRO

Originally Posted by Leo109

Turn all the wheels over so dem valves point inwards. Den swap da wheels from side to side. Den all da valves will be pointing out again! Simple!

Well, dat's da way we'd do it here in Ireland...

Shamus O'Leo, ILRO

Originally Posted by Leo109

Turn all the wheels over so dem valves point inwards. Den swap da wheels from side to side. Den all da valves will be pointing out again! Simple!

Well, dat's da way we'd do it here in Ireland...

Shamus O'Leo, ILRO

Shamus day spell lik dat in iland.

isn't it rland

Originally Posted by dullbird

isn't it rland

Sorry.... my Qwerty keyboard doesn't have predictive texting.