Results 1 to 4 of 4

Thread: Defender AC

  1. 25th March 2009, 10:24 AM #1
    td5130 Guest

    Defender AC

    I have a 2002 Defender 130 with factory Air
    My Ac now only works on fan speed flat out
    fan speed 1 & 2 dont work at all
    I dont realy know what I am looking for but some say there is resisters on the fan motor and some say there behind the switch and others say there is a cercit board in there with a chip on it and the resisters are on that
    but know one has realy told me for sure were the problem is
    Can any one help
    Reply With Quote Reply With Quote
  2. 26th March 2009, 05:26 PM #2
    werdan's Avatar
    werdan
    werdan is offline Master
    Join Date
    Oct 2006
    Location
    Melbourne, VIC
    Posts
    648
    Total Downloaded
    0
    I haven't had this problem yet but since no one else has offered a suggestion, I thought I'd pip in.

    I've been looking at the RAVE CD (disc 2) and found mention of how the AC fan works. Basically the low speed settings go through a resister mounted to a connector (C0425) It is white connector with a Brown/yellow on pin 1, a blue wire on pin 2 and a green wire on pin 4. There is no photo or connector drawing given. The only location given is that it is "behind the RH side of fascia" which I assume to mean the AC control knob panel. You might be able to check it out by removing the RHS speaker and having a look inside the cavity.
    Reply With Quote Reply With Quote
  3. 27th March 2009, 03:50 PM #3
    td5130 Guest
    Thats the same answer I got from a Land Rover Dealer In Melb guess I keep looking Thanks
    Reply With Quote Reply With Quote
  4. 27th March 2009, 03:59 PM #4
    bob h's Avatar
    bob h
    bob h is offline Master
    Join Date
    Aug 2008
    Location
    Deception Bay
    Posts
    161
    Total Downloaded
    0
    Try looking on the side of the fan motor where the wires go in. There may be a resistor there where the wires plug in to the fa motor. Alternativly, ring a wrecker in your area and ask for a price on one and exactly where it is located.

    Bob H
    Reply With Quote Reply With Quote
« CUT THE RUG D2 | GETTING A TENSIONER PULLEY BACK ON »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!