Results 1 to 3 of 3

Thread: 300 tdi cutting out at peak revs

  1. 17th April 2009, 07:04 PM #1
    scotyp
    scotyp is offline Fossicker
    Join Date
    May 2007
    Location
    Airlie beach Qld
    Posts
    69
    Total Downloaded
    0

    300 tdi cutting out at peak revs

    Hi all,

    I have a 130 with a 300 tdi and just as your about to change gears, I suppose peak fuel demand the motor dies, back off the throttle and away it goes again, I am assuming its a fuel problem, maybe its not! I have drained the water seperator and the fuel filter thinking condensation but nothing unusual there,

    is it possible to service the lift pump or check the operation

    would appreciate any thoughts,

    thanks in advance

    Scotty
    Reply With Quote Reply With Quote
  2. 17th April 2009, 07:55 PM #2
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is offline RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,500
    Total Downloaded
    0
    only likely to be 3 things

    1. a blockage in the fuel lines or filters (most likely)
    2. a collapsing air hose
    3. a blocked air filter

    if when it cuts out it doesnt blow black smoke then its a fuel line issue
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
  3. 17th April 2009, 08:09 PM #3
    Tank's Avatar
    Tank
    Tank is offline AT REST
    Join Date
    Jan 1970
    Location
    Moruya Heads/Sth. Coast, NSW
    Posts
    6,532
    Total Downloaded
    0
    Could also be a leak (hole) in the boost compensator diaphragm on the Injector pump, Regards Frank.
    Reply With Quote Reply With Quote
« replacing swivel pin bearing today....any tips ?? | six stud land rover?? »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!