Reply With QuoteIf its like the TD5 in the D2, removing the a/c compressor might not make the original belt too long. I carry a short belt to bypass the ACE pump and can also configure it to bypass the alternator, but never tried to bypass the a/c compressor.
Fossicker
Hi all,
got some collapsed bearings in the compressor on the Defender td5.
We dont use the aircon, it's redundant...
Is it possible to fit a shorter belt ( maybe remove the idler below left of the aircon pulley) to do so ??
Just a thought
Thanks in Advance
nat
Swaggie
If its like the TD5 in the D2, removing the a/c compressor might not make the original belt too long. I carry a short belt to bypass the ACE pump and can also configure it to bypass the alternator, but never tried to bypass the a/c compressor.
MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
VK2HFG and APRS W1 digi, RTK base station using LoRa
YarnMaster
Deefa TD5 belt w/o AC is PQS101490
Deefa TD5 belt w/- AC is PQS101500
Fossicker
Thanks mate,Originally Posted by LOVEMYRANGIE
any tips on which pully is removed / bypassed ??
better to ask dumb questions than make stupid mistakes ..
Regards Nat
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks