Results 1 to 6 of 6

Thread: Think my viscous has seized again

  1. 21st May 2009, 06:56 PM #1
    Rangier Rover Guest

    Unhappy Think my viscous has seized again

    This will be the third Viscous I've done in less than 200 000 kms
    Have noticed the Rangie is making tyre chirping on sharp turns on black top and fuel consumption is shocking. 20+ ltrs / 100...... I think its time for a LT230 even though I have another spare Viscous here.

    Any one want to sell a Defender LT230? I have a Disco one here but would rather go the lower Hi range with the 35s and 4:11 ratios going in so will be more drivable at 80 to 100 kmh.

    Tony
    Reply With Quote Reply With Quote
  2. 21st May 2009, 07:39 PM #2
    Disco_owner's Avatar
    Disco_owner
    Disco_owner is offline YarnMaster Subscriber
    Join Date
    Dec 2006
    Location
    NSW , Pennant Hills
    Posts
    3,477
    Total Downloaded
    0
    Tony;

    I'd Try TRS for a Defender LT230 .... They may have one in good nick . I find their prices to be very reasonable , but why not put in the Disco LT230 in for now to get you out of trouble for now and then look around for a defender LT230 later down the track when your ready to put on 35" and 4.11's.
    Reply With Quote Reply With Quote
  3. 21st May 2009, 07:46 PM #3
    Rangier Rover Guest
    Just been taking about the 94 Disco here. I've decided to part it out as we need a few bits for the Rangie anyway. So will use the Disco LT230 for now. Bit of a shame as would have been a good repairer. The old story... They're worth more as parts.

    I still need a long output shaft for the ZF though

    Tony
    Reply With Quote Reply With Quote
  4. 21st May 2009, 08:35 PM #4
    Disco_owner's Avatar
    Disco_owner
    Disco_owner is offline YarnMaster Subscriber
    Join Date
    Dec 2006
    Location
    NSW , Pennant Hills
    Posts
    3,477
    Total Downloaded
    0
    Quote Originally Posted by Rangier Rover View Post
    Just been taking about the 94 Disco here. I've decided to part it out as we need a few bits for the Rangie anyway. So will use the Disco LT230 for now. Bit of a shame as would have been a good repairer. The old story... They're worth more as parts.

    I still need a long output shaft for the ZF though

    Tony

    can't help you there , my ZF hasn't completely died yet still going . .
    Reply With Quote Reply With Quote
  5. 22nd May 2009, 09:14 AM #5
    mike 90 RR Guest
    Quote Originally Posted by Rangier Rover View Post
    Just been taking about the 94 Disco here

    I still need a long output shaft for the ZF though
    Is the Disco .... Auto or manual??? .... and is it a 3.9V8??

    .... There has to be plenty of ZF's in the markets

    Mike
    Reply With Quote Reply With Quote
  6. 22nd May 2009, 01:46 PM #6
    Rangier Rover Guest
    Quote Originally Posted by mike 90 RR View Post
    Is the Disco .... Auto or manual??? .... and is it a 3.9V8??

    .... There has to be plenty of ZF's in the markets

    Mike
    The Disco is late 94 with R380 and 300Tdi. Probably should put it all in the Rangie
    I just need the long shaft and ideally a fender LT230 as have two good ZFs here.

    Tony
    Reply With Quote Reply With Quote
« D2 R380's , is it straight bolt on with LT230? | Long Range Petrol Tank for 97 Disco »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!