-
15th July 2009, 02:42 PM
#1
front diff pinion bearings, to replace or not to replace.
The front truetrac is on its way from USA (AU$750 to my door with both carrier bearings attached).
I'm trying to sort out any possible warn/leaking parts at the same time I get the truetrac fitted.
So, how can I tell if I should replace my diff pinion bearings whilst its all apart?
The disco has done 170k, should I replace the bearings as a matter of course or an I wasting my money as will they go on for ever?
-
16th July 2009, 07:45 AM
#2
I can't answer your question specifically but can say when I put my truetrac in I didn't touch the pinion bearings. It had about 215000kms on it at the time and the bearings hadn't been touched since new.
Pete
-
16th July 2009, 09:47 AM
#3
if they're noisy, replace them
if not, dont touch them, provided the bearings arent damaged, the lubricant isnt contaminated and there are no shock loads, a bearing will happily run forever
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Search AULRO.com ONLY!
|
Search All the Web!
|
Bookmarks