Page 1 of 3 123 LastLast
Results 1 to 10 of 30

Thread: Isuzu Turbo Manifold

  1. 3rd November 2010, 11:05 PM #1
    lokka Guest

    Isuzu Turbo Manifold

    Gday Guys

    Im looking for a isuzu turbo manifold and a rebuild kit for my turbo .

    Biggest Q is do i make my own manifold from pipe and flanges or do i pay the $380 i was quoted for a new one .

    Im considering building my own manifold and dump pipe so i can mount the turbo were i want it so i can run the exhauxt on the inside of the rails and the dump pipe down behind the alt .

    Any advice or pics would be help full as for the turbo it is a garret unit and is a standard 4bd1T turbo tho i cant find any match on the numbers of its ID tag which reads SF0173J then it has 8943829000 followed by 466898-3 the prob here is i cant match up the numbers to any garret listings which makes it hard to find the rebuild kit for it .
    Reply With Quote Reply With Quote
  2. 4th November 2010, 01:06 AM #2
    isuzurover's Avatar
    isuzurover
    isuzurover is offline Swaggie
    Join Date
    Aug 2006
    Location
    WA
    Posts
    13,786
    Total Downloaded
    0
    The factory manifold seems well designed and should flow well. Most importantly, it places the turbo very close to the ports.

    Btw - my manifold was only $320.

    Reply With Quote Reply With Quote
  3. 4th November 2010, 05:17 AM #3
    lokka Guest
    Yep ben i got the numbers off your post and rang isuzu they quoted me $380 this seems the easyest way to go i just have to find the reco kit for the std turbo now
    Reply With Quote Reply With Quote
  4. 4th November 2010, 05:48 AM #4
    long stroke's Avatar
    long stroke
    long stroke is offline TopicToaster Subscriber
    Join Date
    Oct 2007
    Location
    JUST NORTH OF COFFS HARBOUR NSW
    Posts
    4,178
    Total Downloaded
    0
    We got one off ebay a while back, i'm pretty sure it was alot less then $320
    Dads-
    http://www.aulro.com/afvb/members-ri...-progress.html

    Mine-
    http://www.aulro.com/afvb/members-ri...-progress.html

    Mums- stock 92 200tdi d1.
    Reply With Quote Reply With Quote
  5. 4th November 2010, 07:49 AM #5
    lokka Guest
    Quote Originally Posted by long stroke View Post
    We got one off ebay a while back, i'm pretty sure it was alot less then $320
    Dont tease me like that ive been on the look out for a while and am yet to
    find a used one
    Reply With Quote Reply With Quote
  6. 4th November 2010, 09:23 AM #6
    isuzurover's Avatar
    isuzurover
    isuzurover is offline Swaggie
    Join Date
    Aug 2006
    Location
    WA
    Posts
    13,786
    Total Downloaded
    0
    Quote Originally Posted by lokka View Post
    Yep ben i got the numbers off your post and rang isuzu they quoted me $380 this seems the easyest way to go i just have to find the reco kit for the std turbo now
    Ring Don Kyatt and other generic truck spares places to see if they can beat the ISUZU price.

    Soltoggio Bros truck wreckers in Perth have a few "parts" 4BD1s - with manifolds last time I saw them.
    Reply With Quote Reply With Quote
  7. 4th November 2010, 11:44 AM #7
    lokka Guest
    Well after a few phone calls ive now found this

    84-87 manifold p/n 8941192926 $278 new
    This is the early non water cooled turbo manifold

    88 on manifold p/n 8943662470 $360 new
    This is the same as the one pictured above and im told is for
    the water cooled turbo used in the later trucks .
    Reply With Quote Reply With Quote
  8. 4th November 2010, 11:58 AM #8
    isuzurover's Avatar
    isuzurover
    isuzurover is offline Swaggie
    Join Date
    Aug 2006
    Location
    WA
    Posts
    13,786
    Total Downloaded
    0
    Quote Originally Posted by lokka View Post
    Well after a few phone calls ive now found this

    84-87 manifold p/n 8941192926 $278 new
    This is the early non water cooled turbo manifold

    88 on manifold p/n 8943662470 $360 new
    This is the same as the one pictured above and im told is for
    the water cooled turbo used in the later trucks .
    The one I have has a Garrett T3 bolt pattern. The other will have an IHI bolt pattern.

    There should be a few other variants as well - e.g. there is one dougal has with a downward facing exit.
    Reply With Quote Reply With Quote
  9. 4th November 2010, 12:23 PM #9
    lokka Guest
    Quote Originally Posted by isuzurover View Post
    The one I have has a Garrett T3 bolt pattern. The other will have an IHI bolt pattern.

    There should be a few other variants as well - e.g. there is one dougal has with a downward facing exit.

    Im prety sure dougal's has been cut and welded to get the downward faceing flange .
    Reply With Quote Reply With Quote
  10. 4th November 2010, 01:05 PM #10
    rovercare's Avatar
    rovercare
    rovercare is offline OldBushie
    Join Date
    Jan 1970
    Location
    Yinnar South, Vic
    Posts
    9,943
    Total Downloaded
    0
    I got one, came as dougal's unflipped, can have for $150

    Its the sticky outy one, not the 45degree one
    Reply With Quote Reply With Quote
Page 1 of 3 123 LastLast
« front output shaft bearing | MSA Clutch Throwout »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!