Turbo fitting measurements for isuzutoo-eh

**flagg** · 21st September 2013, 05:41 PM

Not sure if this is exactly what you needed, let me know if not. The bottom of the ruler is about the same height as the T25 mount face - maybe a couple of mm out max.

This is with the flat type turbo manifold. I can fit the EFR Turbo in with the regular bonnet, but not the WTA. The outlet can be moved around the axis of the turbo, so technically you could hav

e it facing down or to the side and have it routed via a FMIC or under the air filter.

**isuzutoo-eh** · 21st September 2013, 10:42 PM

Thanks mate! I'll be able to measure up my turbo and see if it'll fit easily enough. Much appreciated.
BTW for anyone interested an way to measure clearence under the bonnet is to make a cone of al foil, shut the bonnet, open it and measure how flat your cone becomes.

**Bush65** · 22nd September 2013, 06:21 AM

I was always tought that that is a rule, and Queen Elizabeth is our only ruler

Good tip re the al foil.

**flagg** · 22nd September 2013, 07:29 AM

Originally Posted by Bush65

I was always tought that that is a rule, and Queen Elizabeth is our only ruler

Originally Posted by isuzutoo-eh

BTW for anyone interested an way to measure clearence under the bonnet is to make a cone of al foil, shut the bonnet, open it and measure how flat your cone becomes.

Great idea about the foil !! (I'll use one of these hats I have laying around)

**rar110** · 23rd September 2013, 06:45 PM

Originally Posted by isuzutoo-eh

Thanks mate! I'll be able to measure up my turbo and see if it'll fit easily enough. Much appreciated. BTW for anyone interested an way to measure clearence under the bonnet is to make a cone of al foil, shut the bonnet, open it and measure how flat your cone becomes.

I use a rolled up bit of blue-tack.

Thread: Turbo fitting measurements for isuzutoo-eh

Thread Tools

Turbo fitting measurements for isuzutoo-eh

Bookmarks

Bookmarks

Posting Permissions