Reply With Quoteyes the 4BB1 (from memory) its the baby brother of the 4BD1. Ive seen 4 or 5 fitted to series rovers and derated at the bottom end to allow the gearbox a chance (they tend to eat first and second)
Has any one fitted a isuzu 3.1 to a land rover
RoverLord
yes the 4BB1 (from memory) its the baby brother of the 4BD1. Ive seen 4 or 5 fitted to series rovers and derated at the bottom end to allow the gearbox a chance (they tend to eat first and second)
Dave
"In a Landrover the other vehicle is your crumple zone."
For spelling call Rogets, for mechanicing call me.
Fozzy, 2.25D SIII Ex DCA Ute
TdiautoManual d1 (gave it to the Mupion)
Archaeoptersix 1990 6x6 dual cab(This things staying)
If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
If you think you're in front on the deal, pay it forwards.
Wizard
SubscriberAh the 4bb1 is a 3.6 ltr, a 3.1 would be most likely a 4j series engine.
Cheers Hall
ForumSage
The 3.1 is a 4JG2. Indirect injection.
I'm sure it's been done plenty. But IMO it's not the best engine to fit. The 4JB1T or 4JH1T (3.0tdi, has an electronic pump but can probabaly be swapped) are your best bets in the Isuzu 4J range.
Any adapters for the 3.1 should fit all Isuzu 4J engines. Right up to the 4JJ1 commonrail.
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks