Results 1 to 3 of 3

Thread: Gearbox and Clutch shenanigans

  1. 11th January 2016, 11:15 AM #1
    flagg's Avatar
    flagg
    flagg is offline YarnMaster Subscriber
    Join Date
    Sep 2007
    Location
    Aussie Expat in NZ
    Posts
    3,451
    Total Downloaded
    0

    Gearbox and Clutch shenanigans

    Hi all,

    I have a whee pickle.. Some will know a while ago I chewed 3rd on my r380 in my 110. It was converted from an lt85 about 8 years ago. There was no gearbox number on the old box so as i couldn't determine the series of it I got a new box from Ashcroft in the UK.

    Long story short, the new box has the input shaft pattern the same as an Lt85 but the old R380 was (I think) tdi.

    The overall length is right, but it needs a different spigot and (the biggie) the splines are not in the right place to engage the clutch.

    I'm working over seas at the moment so I have a landrover mechanic doing the install for me....

    Thinking logically, I just need the correct (for the old lt85) clutch (and flywheel etc?) to get it to link up. Am I correct here? The other option is to put a different input shaft into the gearbox - Ashcroft are happy to supply this but taking the box apart would be at my cost...

    If I'm correct about the clutch swap, what parts do I need?

    Thanks
    Hercules: 1986 110 Isuzu 3.9 (4BD1-T)
    Brutus: 1969 109 ExMil 2a FFT (loved and lost)
    Reply With Quote Reply With Quote
  2. 11th January 2016, 10:00 PM #2
    steveG's Avatar
    steveG
    steveG is offline TopicToaster Subscriber
    Join Date
    Sep 2008
    Location
    Geelong, VIC
    Posts
    4,442
    Total Downloaded
    0
    Some info and P/N's for the spigot bearing and bush here: http://www.aulro.com/afvb/projects-t...g-housing.html

    I'd think you'd just need the LT85 clutch plate, assuming you've got the standard 275mm clutch fitted. P/N is AYG3463 according to the part numbers sticky.

    Steve
    1985 County - Isuzu 4bd1 with HX30W turbo, LT95, 255/85-16 KM2's
    1988 120 with rust and potential
    1999 300tdi 130 single cab - "stock as bro"
    2003 D2a Td5 - the boss's daily drive
    Reply With Quote Reply With Quote
  3. 13th January 2016, 08:07 PM #3
    Adrian18 Guest
    Use a lt85 4bd1 clutchplate -same spline as td5 and 300tdi clutch plates but diff o.d..... your gearbox needs to have a 300tdi pinon shaft ...have a look at my thread on my install send me a pm if you want talk it through on the phone happy to help

    Sent from my SM-N920I using AULRO mobile app
    Reply With Quote Reply With Quote
« Land rover isuzu 2 inch lift kit | Isuzu rear crank seal »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!