ForumSage
Just buy one of these: T3 Flange to T25 T28 Turbo Flange Adapter T3 T4 T04E GT25 GT28 GT2876R GT3076R | eBayOriginally Posted by ScottW
Dougal, could I please have a set of plans to get an adapter made up? I'll send you a PM.
Does anyony know somewhere on the Gold Coast that could make up a set of these? Or alternatively, does anyone have a spare set they'd be willing to part with?
I may be trying to sell my county, but that doesn't mean I have to stop doing things to it
Master
Cool, As long as the extra thickness isn't an issue. I haven't looked at everything that closely yet to see what needs to be done.
Just worked out they want $50 for shipping! That's a bit over the top.
T3-TO-T25-T28-TURBO-FLANGE-ADAPTER-CONVERSION
This one looks the same at $50 shipped. 1.5 inches overall thickness.
ChatterBox
Short answer is 1.5" won't matter. Using the Isuzu manifold it is at ~45*, so you only lose part of that in vertical height.
Longer answer: It will depend on the bonnet, manifold type, turbo type/size and other size/space constraints like air con/heater, etc.
Fossicker
if you want an adaptor with total thickness 16mm and tried and tested pm me.
Fossicker
Has anyone considered if using an adapter style similar to the following, and drilling+tapping the pyrometer probe into it?
ChatterBox
It's perfectly fine as long as you're happy with the 2.5" depth. That depends on which manifold you use and what else is nearby in the engine bay and bonnet height.
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Reply With Quote
Bookmarks