Isuzu shutdown actuator

**Dave_S** · 26th March 2010, 01:45 PM

While you're messing around with the wiring, see if you can find the fuse that sits behind the dash up against the firewall (ie inside the cab but not with all the other fuses). It's a bugger to find if you need to replace it, so relocating it while you're making some changes is a really good idea.

Rangier Rover · 26th March 2010, 03:06 PM

This is what I found when I pulled it all apart

Has been in to much deep water here

Silly idea having it siting in that bag that holds the water in

Looks like the armature,brushes and magnets are OK so I'll have a go at repairing the body. May be machine up something that it will slide into and then machine a removable end cover to hold a bush. Not sure what to use to glue the magnets back in though

**rovercare** · 26th March 2010, 03:47 PM

The one I got of JC was much the same, it came with his donor engine, I just aluminium taped the holes and painted it in cold gal

Rangier Rover · 27th March 2010, 02:47 PM

I made a new end for the motor housing and stuck the magnets back in. Sealed it all up and it still wont work

The armature must be stuffed

I cant see why else it wont go. All free as a bird to turn. Its getting power and drawing current.

I need to get this working for rego.

I'll try all the wreckers on Monday and if no avail its bad news. I'll have to adapt one off an industrial engine watch dog maybe.

**rovercare** · 27th March 2010, 03:57 PM

If your desperate for rego, I can send you one for a lend, but it comes back, it lives in my 120"

**rovercare** · 27th March 2010, 03:59 PM

Oh, did you apply 12V straight to the motor to see if it works?I can't remember if they have an internal auto resetting thermal OL as like a windo motor, but if so, be sure to check that for continuity

Rangier Rover · 27th March 2010, 04:06 PM

Originally Posted by rovercare

If your desperate for rego, I can send you one for a lend, but it comes back, it lives in my 120"

Due on the 14th

I may take you up on that if I cant find a substitute, Then it will be like this next year

Originally Posted by rovercare

Oh, did you apply 12V straight to the motor to see if it works?I can't remember if they have an internal auto resetting thermal OL as like a windo motor, but if so, be sure to check that for continuity

I'll try that now, does appear to be power at the brushes however

Rangier Rover · 27th March 2010, 05:14 PM

Do we have a dummy spit smiley here?

It's not a good look

I've wasted enough time on this so looking for anothery. May be adapt an electric window motor some how?

Tony

**rovercare** · 27th March 2010, 05:18 PM

Originally Posted by Rangier Rover

Do we have a dummy spit smiley here?

It's not a good look

I've wasted enough time on this so looking for anothery. May be adapt an electric window motor some how?

Tony

Just buy a newy from that singapore shop, what I'd do

**rovercare** · 27th March 2010, 05:19 PM

So you've applied 12V direct to the motor alone?

Thread: Isuzu shutdown actuator

Thread Tools

Bookmarks

Bookmarks

Posting Permissions