Page 128 of 1006 FirstFirst ... 2878118126127128129130138178228628 ... LastLast
Results 1,271 to 1,280 of 10053

Thread: Embarrassment

  1. #1271
    drifter Guest
    Quote Originally Posted by banjo View Post
    Drifter is probably snapping someone right now..

    Just going through my emails - it takes a while

    What I should have been doing is taking pictures of the rebuild effort. I have a few 'snaps' but nothing serious and there have been lots of times when I should have taken some.

    This past weekend:

    All I managed to get done was:

    completed the wiring
    installed Series 3/late 2a wipers (single motor) - all in and working!
    created mount points for facia panel that covers wiper spindle and control line.
    drilled and cut holes and installed demister tubing and demister heads

    I was about to go and install new park and indicator lights all round - one park light was refusing to function last weekend so I ordered a whole new set - but now the original is working so I'll leave that for now.

    Next steps:
    strip down the heater assy - clean and pressure test - check lecky motor and bearings - mount in vehicle
    finish refurbishing steering wheel and mount that back in the vehicle

    neither of those will get done any time soon

    and after all that -
    I am getting close to getting an engine ready for it
    I need to sort out an exhaust system
    I need to get the seats recovered
    I have ordered new door rubbers
    I am about to order new rear and side window rubbers
    I am about to order two new door tops and possibly a passenger door.

    Then I get to sort out the brakes and clutch hydraulics


    so - still a bit to do

  2. #1272
    Join Date
    Oct 2009
    Location
    Lake Macquarie. NSW.
    Posts
    7,996
    Total Downloaded
    0
    I'm here Banjo!!!

  3. #1273
    Join Date
    Mar 2008
    Location
    Melb. Vic.
    Posts
    6,045
    Total Downloaded
    0
    Hehehe....Nah Aus was at work and I was having a nanna nap. Living up to my name again.

    Hey Banjo, what shockers do you reckon I should put on my Series 3? Thinking of a new steering damper too.

    I search here on aulro but takes 90 secs between each search so takes forever Haven't found any good threads.

  4. #1274
    drifter Guest
    Quote Originally Posted by Sleepy View Post
    Hehehe....Nah Aus was at work and I was having a nanna nap. Living up to my name again.

    Hey Banjo, what shockers do you reckon I should put on my Series 3? Thinking of a new steering damper too.

    I search here on aulro but takes 90 secs between each search so takes forever Haven't found any good threads.
    I'd be interested in the steering damper, too.

  5. #1275
    Join Date
    Nov 2006
    Location
    cardiff ,NEWCASTLE.
    Posts
    6,731
    Total Downloaded
    0
    Quote Originally Posted by drifter View Post
    Just going through my emails - it takes a while

    What I should have been doing is taking pictures of the rebuild effort. I have a few 'snaps' but nothing serious and there have been lots of times when I should have taken some.

    This past weekend:

    All I managed to get done was:

    completed the wiring
    installed Series 3/late 2a wipers (single motor) - all in and working!
    created mount points for facia panel that covers wiper spindle and control line.
    drilled and cut holes and installed demister tubing and demister heads

    I was about to go and install new park and indicator lights all round - one park light was refusing to function last weekend so I ordered a whole new set - but now the original is working so I'll leave that for now.

    Next steps:
    strip down the heater assy - clean and pressure test - check lecky motor and bearings - mount in vehicle
    finish refurbishing steering wheel and mount that back in the vehicle

    neither of those will get done any time soon

    and after all that -
    I am getting close to getting an engine ready for it
    I need to sort out an exhaust system
    I need to get the seats recovered
    I have ordered new door rubbers
    I am about to order new rear and side window rubbers
    I am about to order two new door tops and possibly a passenger door.

    Then I get to sort out the brakes and clutch hydraulics


    so - still a bit to do
    NA couple of weeks you will be all done.
    I made a whole new wireing harness for mine.
    The park light will be the earth on that one light.
    Heater assembaly WHATS THAT mine didn't have one so i never put one in it .but super crap sell those new ceramic one so i will use those when it gets cool not cold enuff yet to worry about that..
    Steering wheel i have a sports one SMALL.
    I used defender door rubbers allround second hand.
    My side window rubbers came from CLARK RUBBER was heaps cheaper buy it the length.
    I need a new door top for drivers side passenger side one is an allor one would love one for the drivers side to no rust.
    The brakes dont go there mine where a nightmare, i had to take the whole assembaly off & sit them upside down on the swivel to bleed them properly,if you have trouble i will send you some pics & info on how we got mine done fatty's graet on brakes actualy she's good on all things resto she helped me with all mine i just dont let her weld although it is funny to watch.

    1969 LWB S2a yellow, gone
    1972 LWB S2a 5 DOOR wagon coming & GONE
    1973 LWB S3 green Sadly GONE
    1977 LWB S3 tabletop building
    1992 disco BOINGY BOINGY

    My landrover doesn't leak oil , IT SWEATS POWER

    JASON & KAREN

  6. #1276
    Join Date
    Nov 2006
    Location
    cardiff ,NEWCASTLE.
    Posts
    6,731
    Total Downloaded
    0
    Quote Originally Posted by Ausfree View Post
    I'm here Banjo!!!
    I hear ya

    1969 LWB S2a yellow, gone
    1972 LWB S2a 5 DOOR wagon coming & GONE
    1973 LWB S3 green Sadly GONE
    1977 LWB S3 tabletop building
    1992 disco BOINGY BOINGY

    My landrover doesn't leak oil , IT SWEATS POWER

    JASON & KAREN

  7. #1277
    Join Date
    Nov 2006
    Location
    cardiff ,NEWCASTLE.
    Posts
    6,731
    Total Downloaded
    0
    Quote Originally Posted by Sleepy View Post
    Hehehe....Nah Aus was at work and I was having a nanna nap. Living up to my name again.

    Hey Banjo, what shockers do you reckon I should put on my Series 3? Thinking of a new steering damper too.

    I search here on aulro but takes 90 secs between each search so takes forever Haven't found any good threads.


    I always use brandnew origanal ones unless changing the springs to a modified set for extra height.Same with steering damper..we got ours cheap at All4X4..

    1969 LWB S2a yellow, gone
    1972 LWB S2a 5 DOOR wagon coming & GONE
    1973 LWB S3 green Sadly GONE
    1977 LWB S3 tabletop building
    1992 disco BOINGY BOINGY

    My landrover doesn't leak oil , IT SWEATS POWER

    JASON & KAREN

  8. #1278
    Join Date
    Mar 2008
    Location
    Melb. Vic.
    Posts
    6,045
    Total Downloaded
    0
    Quote Originally Posted by banjo View Post
    I always use brandnew origanal ones unless changing the springs to a modified set for extra height.Same with steering damper..we got ours cheap at All4X4..
    Thanks Jas, just sent them an email - I love the internet. Yeah I will stick with standard set up.
    I will have a go at fitting them myself. No idea but it doesn't look that hard. (He says looking for his bike helmet )

  9. #1279
    Join Date
    Mar 2009
    Location
    Derbyshire UK
    Posts
    4,370
    Total Downloaded
    0
    aye up you two

  10. #1280
    drifter Guest
    Quote Originally Posted by banjo View Post
    NA couple of weeks you will be all done.
    I made a whole new wireing harness for mine.
    That's what I did.
    Quote Originally Posted by banjo View Post
    The park light will be the earth on that one light.
    I checked that at the time. Pulled the light apart and looked up the socket - the connection inside looked nurfed - that's when I said 'SOD it' and ordered all new lights all around.

    Quote Originally Posted by banjo View Post
    Heater assembaly WHATS THAT mine didn't have one so i never put one in it .but super crap sell those new ceramic one so i will use those when it gets cool not cold enuff yet to worry about that..
    I mainly wanted mine to demist the windscreen. Pulled it out of the donor.

    Quote Originally Posted by banjo View Post
    Steering wheel i have a sports one SMALL.
    Mine is the standard one - and I'll use that since I just bought a brand new horn assembly for the middle of it.

    Quote Originally Posted by banjo View Post
    I used defender door rubbers allround second hand.
    My side window rubbers came from CLARK RUBBER was heaps cheaper buy it the length.
    The door rubbers are coming from the UK. The window rubber from Clarks will cost around $146 - so I am trying to find a better option.

    Quote Originally Posted by banjo View Post
    I need a new door top for drivers side passenger side one is an allor one would love one for the drivers side to no rust.
    I'm looking at the alloy door tops - a bit pricey though.

    Quote Originally Posted by banjo View Post
    The brakes dont go there mine where a nightmare, i had to take the whole assembaly off & sit them upside down on the swivel to bleed them properly,if you have trouble i will send you some pics & info on how we got mine done fatty's graet on brakes actualy she's good on all things resto she helped me with all mine i just dont let her weld although it is funny to watch.
    My stepson has a bleeder unit that works on compressed air so we will be giving it a shot with that first.

    Good to hear Fatty was useful. Mine is embarrassed, I think, and now wants it off the front yard. I said it will go when I can drive it off!

Page 128 of 1006 FirstFirst ... 2878118126127128129130138178228628 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!