I'm here Banjo!!!![]()
Just going through my emails - it takes a while
What I should have been doing is taking pictures of the rebuild effort. I have a few 'snaps' but nothing serious and there have been lots of times when I should have taken some.
This past weekend:
All I managed to get done was:
completed the wiring
installed Series 3/late 2a wipers (single motor) - all in and working!
created mount points for facia panel that covers wiper spindle and control line.
drilled and cut holes and installed demister tubing and demister heads
I was about to go and install new park and indicator lights all round - one park light was refusing to function last weekend so I ordered a whole new set - but now the original is working so I'll leave that for now.
Next steps:
strip down the heater assy - clean and pressure test - check lecky motor and bearings - mount in vehicle
finish refurbishing steering wheel and mount that back in the vehicle
neither of those will get done any time soon![]()
and after all that -
I am getting close to getting an engine ready for it
I need to sort out an exhaust system
I need to get the seats recovered
I have ordered new door rubbers
I am about to order new rear and side window rubbers
I am about to order two new door tops and possibly a passenger door.
Then I get to sort out the brakes and clutch hydraulics
so - still a bit to do![]()
I'm here Banjo!!!![]()
Hehehe....Nah Aus was at work and I was having a nanna nap.Living up to my name again.
Hey Banjo, what shockers do you reckon I should put on my Series 3? Thinking of a new steering damper too.
I search here on aulro but takes 90 secs between each search so takes foreverHaven't found any good threads.
NA couple of weeks you will be all done.
I made a whole new wireing harness for mine.
The park light will be the earth on that one light.
Heater assembaly WHATS THAT mine didn't have one so i never put one in it .but super crap sell those new ceramic one so i will use those when it gets cool not cold enuff yet to worry about that..
Steering wheel i have a sports one SMALL.
I used defender door rubbers allround second hand.
My side window rubbers came from CLARK RUBBER was heaps cheaper buy it the length.
I need a new door top for drivers side passenger side one is an allor one would love one for the drivers side to no rust.
The brakes dont go there mine where a nightmare, i had to take the whole assembaly off & sit them upside down on the swivel to bleed them properly,if you have trouble i will send you some pics & info on how we got mine done fatty's graet on brakes actualy she's good on all things resto she helped me with all mine i just dont let her weld although it is funny to watch.
1969 LWB S2a yellow, gone
1972 LWB S2a 5 DOOR wagon coming & GONE
1973 LWB S3 green Sadly GONE
1977 LWB S3 tabletop building
1992 disco BOINGY BOINGY
My landrover doesn't leak oil , IT SWEATS POWER
JASON & KAREN
1969 LWB S2a yellow, gone
1972 LWB S2a 5 DOOR wagon coming & GONE
1973 LWB S3 green Sadly GONE
1977 LWB S3 tabletop building
1992 disco BOINGY BOINGY
My landrover doesn't leak oil , IT SWEATS POWER
JASON & KAREN
aye up you two
That's what I did.
I checked that at the time. Pulled the light apart and looked up the socket - the connection inside looked nurfed - that's when I said 'SOD it' and ordered all new lights all around.
I mainly wanted mine to demist the windscreen. Pulled it out of the donor.
Mine is the standard one - and I'll use that since I just bought a brand new horn assembly for the middle of it.
The door rubbers are coming from the UK. The window rubber from Clarks will cost around $146 - so I am trying to find a better option.
I'm looking at the alloy door tops - a bit pricey though.
My stepson has a bleeder unit that works on compressed air so we will be giving it a shot with that first.
Good to hear Fatty was useful. Mine is embarrassed, I think, and now wants it off the front yard. I said it will go when I can drive it off!
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks