Thread: LED Light Bars....Special offer

Originally Posted by rijidij

Curved would be a good idea, but I haven't seen anything like that yet. It might be an interesting project to see if the ally extrusion could be rolled so it has a slight curve.
The closest I have to a 50" is the 240W bar at 48.5" (1235mm). The current stock of these is sold, but I can get more.

Cheers, Murray

rolling the alloy still leaves the flat mount plates inside fort he emitters, might be time for me to sacrifice my 40" bar for some testing, though I can already see issues with the front plate no longer fitting once the housing is rolled. . . a worth sacrifice to see if its do-able (maybe a market for you and your engineering prowess? happy to help with the electronics side)

Ill hold off till your next mass order(don't want to bet he reason fro an order), and may grab one then depending on job situation at the time.

Leroy

Didn't fully unpack mine from the box (the 240W one) as I'm in the process of packing up the house, not the reverse. What mounting arrangement is used? I'm looking to get a roof bar to mount it to, but need to know how to do so.

I know of one bar that I can get which has 'spotlight mounts' incorporated into it (I presume this means just like tabs on a bullbar)

Originally Posted by VladTepes

Didn't fully unpack mine from the box (the 240W one) as I'm in the process of packing up the house, not the reverse. What mounting arrangement is used? I'm looking to get a roof bar to mount it to, but need to know how to do so.

I know of one bar that I can get which has 'spotlight mounts' incorporated into it (I presume this means just like tabs on a bullbar)

drill some holes in a standard roof bar?

my roof cage has holes in it for lights or other paraphernalia, though i have a flat rack for the purpose of carrying large sheets of flat ply and the bolts sticking up make that difficult. . .

if you don't already have a roof bar, pick up a cheap lonley single roof bar from the wrecker and drill some holes in it set of roof racks from a wrecker are cheap, I go to Narangba wrecking co, see Dave there and tell him what I want he says "somewhere in the back corner' go for a hunt and get me whats I want $50 later for a full set of rolla racks with tracks(had to pull them off myself) . . . im sure you could get a single gutter rack cheaper.

Leroy

Originally Posted by VladTepes

Didn't fully unpack mine from the box (the 240W one) as I'm in the process of packing up the house, not the reverse. What mounting arrangement is used? I'm looking to get a roof bar to mount it to, but need to know how to do so.

I know of one bar that I can get which has 'spotlight mounts' incorporated into it (I presume this means just like tabs on a bullbar)

Have a look back on page 14 of this thread, there's a pic of one of the mounts.

Cheers, Murray

Hey Murray,

Just wondering if you have any light bars in stock at the moment and what sizes?

Cheers
Will

Originally Posted by MR LR

Hey Murray,

Just wondering if you have any light bars in stock at the moment and what sizes?

Cheers
Will

G'day Will,
I have a spare 180 combo, 120 spot or 120 combo and 30 flood.

Cheers, Murray

G'day Murray I would be interested in a 120 combo and 2 30 Spread beams if you an supply let me know how you go , Cheers Richard ....

Hi Murray,

Got my light bars in the mail today and must say I am very happy with my first impression of the quality! They look the goods, now just to wire them up and test!

Thanks for the fantastic service.

I'd recommend Rijidij offroad to anyone.

Cheers
Will