Page 6 of 8 FirstFirst ... 45678 LastLast
Results 51 to 60 of 78

Thread: Td5 vs tdci

  1. #51
    Join Date
    Jan 1970
    Location
    NSW far north coast
    Posts
    17,285
    Total Downloaded
    0
    Quote Originally Posted by justinc View Post
    I'm not sure if I will be welcome here, so I'll just keep moving right along....

    😮😮😮

    Jc

  2. #52
    Join Date
    May 2014
    Location
    Tamworth NSW
    Posts
    4,295
    Total Downloaded
    0
    Full disclosure- I drive a puma, and have only driven a TD5 powered vehicle once.
    Like others have suggested, this is a fruitless debate.

    In puma's defence, most of the issues that have been quoted are, let's face it, minor. Hoses can be changed, output shafts are not outrageously expensive, and the engine itself is by all accounts a capable unit with decent power and economy in a compact package. Major mechanical failures are rare- on par or better than most other vehicles.

    It should be noted that TD5's are not without their issues as well. But not my place to say.
    -Mitch
    'El Burro' 2012 Defender 90.

  3. #53
    Join Date
    Jun 2013
    Location
    Warner Area - SEQ
    Posts
    1,924
    Total Downloaded
    0

    Question

    Quote Originally Posted by PAT303 View Post
    Rob,I've towed my Cub Camper all over WA,the TDCi tows fine,as for outback reliability,I've driven mine to more places than 90% of 4wd's will ever go without issue's.I'll stand by my original comments,the TDCi is the best Defender. Pat
    Hey Pat,

    Has your Puma been tweaked or is it standard? I realise along flat roads, etc that both the Td5 & puma will tow ok, but it's the slight inclines, hills, etc. I'm wanting a vehicle that will tow reasonably well and would be able to pass others w/o having to wait for a piece of straight road 5kms long just so I can get around. I know there's no real substitute for cubic inch when it comes to performance, but I just don't want something that when I'm towing out 17" van that every incline/hill that I come to that the vehicle dies in the ar*e & I'm back down to 60/70ks on the Hwy... A good mate of mine has the 2.4 Puma 130 and he's quite often telling me how poor his tows his 5.7mtr boat. He's now considering the performance upgrade for his as he's been told that there's around a 50% increase in performance or there abouts.....

    I like both the TD5 and PUMA, but trying to decide which one would meet my needs is proving quite difficult as I'm hoping the next vehicle we get will be the last one for a very long time to come.... Then I also need to consider the missus and even those she is pretty easy going, I feel the interior of the PUMA would suit her better as well......

  4. #54
    Join Date
    Jun 2013
    Location
    Warner Area - SEQ
    Posts
    1,924
    Total Downloaded
    0

    Injectors - Cost of Each and do they ever need replacing?

    I recently had to change the Injectors in the wife's '10 Prado 150 D4d at the 160k Service which in my eyes turned out to be a VERY costly exercise, but upon talking to other people and different vehicle makes, it looks like it wasn't too bad. Toyota in their service schedule never mention injector replacement but talk to most mechanics or those experienced with the D4d and they will tell u that u should replace them at 100k.... Now, I run a AUX 2 micron Fuel Filter + I've always tried to fuel up a the local BP Servo and use their BP Ultimate Diesel to try and prevent the injectors from having to be replaced, but it looks like it just delayed the inevitable....

    My question is what is the service life of the PUMA and TD5 injectors? If the vehicle is serviced well and filters changed accordingly, do u have to ever change the Injectors in the TD5 and PUMA?

    I got quoted from MR Auto that TD5 injectors are about $800>$880 each (Ouch, that's dear).
    Looking on the Web, the PUMA ones off Paddocks is around $325 each which is cheaper that what I had to pay for my Toyota injectors. I'm not sure if there would be many PUMAs out there with HIGH kms on them, but after having to fork out some big $$ for our car, it got me wondering what to expect with the PUMA & TD5's. Do the TD5's injectors ever need replacing?

    btw: from searching on the web, the Injectors for the PUMA's are about half the price of the TD5 injectors....

    rob

  5. #55
    Join Date
    Feb 2016
    Location
    Melbourne
    Posts
    452
    Total Downloaded
    0
    I have never driven a td5. I like the sound of them when modified.

    I am am extremely happy with my 2.2. I have the tune and intercooler with silicone hoses and decat done. On road and off road I cannot complain at all. That along with the newer interior makes me a happy owner. Enough power for my needs and maintenance so far has been great

  6. #56
    Join Date
    Apr 2011
    Location
    Windsor NSW
    Posts
    200
    Total Downloaded
    0

    2.2 is too slow towing up hill

    Hi,
    I have had all Defender models privately and provided by my employer and currently own a 300Tdi big cab auto and a puma 2.2 130 dual cab, my family also a 110 2.2 wagon and feel I can comment on towing as we regularly tow either a horse float or an off road van weighing about 1800-1900kgs.

    My experience is that the 300tdi is great but slow so when getting into pumas expected more--I am sorry but my 130 puma struggles when towing particularly on long up hill gradients--only yesterday on the run from the Hawkesbury River bridge up hill towards Mt Colah I was being passed by all and sundry also with vans, boats--yet on steep sections it actually is not too bad. However taking off from traffic lights when there is a slight incline is embarrasing!

    My car has not had any issues and is regularly dealer serviced so as to keep my Rover Assist as now just out of warranty but I have decided that for towing it is lacking for me--so I will be looking at either a 3.2ltr transplant or a vehicle change. If I can get it done and keep the other aspects of the puma model then maybe a retro fit of an Isuzu turbo 3.9 might be possible as is being done here in Sydney by some LR people. The 110 in the family is also overly affected by towing--it really is in my opinion that the cubic capacity is insufficient when towing although unloaded they perform brilliantly. I think the TD5 if I remember was better at towing but it is quite a while since I have driven one.

    I know that I can have the 2.2 performance improved but still feel it is low down torgue that is what I am after.

    If any members have had a successful engine transplant done please let me know.
    Thanks,
    Alan

  7. #57
    Join Date
    Feb 2013
    Location
    Sunshine Coast
    Posts
    790
    Total Downloaded
    0
    I drive Defenders of both types frequently. I personally wouldn't own either, but my preference would be for a Td5. It seems like a lot of people like the MT-82 but I certainly don't count myself among them. The sad fact is that no matter how much more power you wring out of the little puma, the extra (notchy, horrible feeling) gear change to get to a reasonable speed keeps you slower than a Td5 with the same money spent on it. Perhaps all this is emphasised by how brilliant is the R380 is.

    Someone also brought up the inability to self prime; incredibly frustrating in a rugged 4x4. If you have a compressor on board you can pressurise the tank, but you shouldn't have to. Pressurising the tank is far from a silver bullet at any rate.

    I've also seen Pumas with corrosion problems that earlier Defenders seem to have avoided entirely like around joins in the roof and the under-tub reinforcement.

    The most important point for me though, is that I simply don't enjoy the Puma driving experience. I would like to try a Puma - R380 combination though.

  8. #58
    Join Date
    May 2007
    Location
    Safety Bay
    Posts
    8,041
    Total Downloaded
    0
    Rob,all vehicles will slow down on hills especially towing a 5.7m boat.Mine sits on 70 going up some of the hills down south but who cares,owners of bigger engined vehicles do the same,they use to much fuel otherwise.I'm the first to admit the TDCi could use more torque,but then again it's done lots of outback driving,just like my old Tdi.Forget the BS about adapter splines etc,it's a known problem,fix it and move on,same with the weak diff,I've never broken one or a rover for that matter,and all my eight LR's I've owned to date have worked for their living. Pat

  9. #59
    Join Date
    May 2007
    Location
    Safety Bay
    Posts
    8,041
    Total Downloaded
    0
    Quote Originally Posted by Dervish View Post
    I drive Defenders of both types frequently. I personally wouldn't own either, but my preference would be for a Td5. It seems like a lot of people like the MT-82 but I certainly don't count myself among them. The sad fact is that no matter how much more power you wring out of the little puma, the extra (notchy, horrible feeling) gear change to get to a reasonable speed keeps you slower than a Td5 with the same money spent on it. Perhaps all this is emphasised by how brilliant is the R380 is.

    Someone also brought up the inability to self prime; incredibly frustrating in a rugged 4x4. If you have a compressor on board you can pressurise the tank, but you shouldn't have to. Pressurising the tank is far from a silver bullet at any rate.

    I've also seen Pumas with corrosion problems that earlier Defenders seem to have avoided entirely like around joins in the roof and the under-tub reinforcement.

    The most important point for me though, is that I simply don't enjoy the Puma driving experience. I would like to try a Puma - R380 combination though.
    Someone brought up the inability to self prime who doesn't know what he's talking about,I've run my TDCi out of fuel twice on purpose and refilling it with fuel it started both times straight away.It becomes a problem if you do something stupid like remove the fuel filter with it running or fitting an empty filter and starting it. Pat

  10. #60
    Join Date
    May 2014
    Location
    Tamworth NSW
    Posts
    4,295
    Total Downloaded
    0
    Quote Originally Posted by PAT303 View Post
    Someone brought up the inability to self prime who doesn't know what he's talking about,I've run my TDCi out of fuel twice on purpose and refilling it with fuel it started both times straight away.It becomes a problem if you do something stupid like remove the fuel filter with it running or fitting an empty filter and starting it. Pat
    I need to correct the record here.
    The TDCI has a fuel starvation map, where the engine drops performance in a few stages, terminating in limp mode before the engine willingly lets itself run out of fuel. Some people think this is silly, having electronic systems in place to prevent mechanical events, but I think it's also a benefit. Engine limp mode is just that- limping to prevent further engin injury / damage. I've copy/pasted some info on this below.

    If, on the other hand, you lose fuel prime for example changine a fuel filter (or larger damage / repairs), then the 2.2 and 2.4 TDCI handle this differently.
    The 2.4 has no in-tank lift pump. The HP pump on the engine block does the lift and HP stages. Bleeding this can involve some tomfoolery, but is not impossible.
    The 2.2 has an in-tank lift pump, and HP pump on the block. Priming the fuel system in this case is a simple matter of keying IGN on for 15 seconds, then OFF for 15, rinse and repeat about 6 or so times. You will hear the lift pump gurgling fuel and air bubbles back into the tank throughout this process.





    LOW FUEL INDICATION AND RUN DRY STRATEGY
    The run-dry strategy is used to maintain the systems fuel prime at fuel run out. It ensures the minimum amount of fuel is
    always left in the swirl pot.
    The instrument cluster activates the yellow low fuel warning light (next to the fuel gauge) with 17% of fuel remaining in
    the tank. The fuel gauge will indicate empty with 12% of fuel left in the tank.
    With 6 liters left in the tank the run-dry strategy will be invoked. An engine mis-fire will be induced for approximately 1
    mile after which the engine will be shut down. The engine can be re-started in mis-fire mode and will continue to run for a
    further mile until the engine shuts down again. This can be repeated until the fuel suction port in the tank is uncovered
    and causes engine fuel starvation and loss of prime. Re-starts after run-dry shut down are not recommended.
    -Mitch
    'El Burro' 2012 Defender 90.

Page 6 of 8 FirstFirst ... 45678 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!