Here is a pic
![]()
Mate that's a disgrace! If the inspector has a bias against a particular vehicle that clearly influences their judgement then he/she shouldn't be there. The compliance is under an ADR, not their stupid opinion.
I hope you escalate a complaint against the fool.
Good luck with it mate, and I hope the only thing you have to change is the oil.
Matt.
Here is a pic
![]()
nice truck, mate. i hope you get things sorted. sounds like you've found a petty bureaucrat there
Hey Chris have a look at this thread from REMLR its from all states just look for the SA posts
Registering a 'Perentie' Landrover
![]()
id be getting the previous rego information and saying if it complied then why not now
have a good one :D ken :wasntme:
MY07 L320 RANGE ROVER SPORT MORE GOODNESS TO COME
MY03 D2A TD5 EXTRA GOODIE ENHANCED :D now parting from life
1996 D1 300TDI GONE
08 ford ranger c/c
WRECKING DISCOVERY 2
PM ME FOR WHAT YOU ARE LOOKING FOR
Here,s a thread directly about SA rego
Perentie registration in South Australia
![]()
So sorry. Sad news.
You will never get that registered. I'll tell you what, I'll dispose of it for you free of charge. Just meet me at the airport.
Seriously, you're the only person who has had trouble registering one of these RFSV's. Another person with a FFR had troubles with a different chassis number but Grays helped him out there.
I think Grays should be informed that this sort of shenanigans is going on as this will eventually have an impact on their auctions.
Good luck. I hope you get it sorted soon.
www.ombudsman.sa.gov.au/
You could try this .We had a heap of grief with Queensland Transport once .I contacted the ombudsman Qld who were the best government dep I have ever dealt withgood luck
I'm going to burst your bubble.
That's an rsv. The bolt on box's on the side are a part of a mission kit.
they have to come off for the vehicle to pass roadworthy.
Dave
"In a Landrover the other vehicle is your crumple zone."
For spelling call Rogets, for mechanicing call me.
Fozzy, 2.25D SIII Ex DCA Ute
TdiautoManual d1 (gave it to the Mupion)
Archaeoptersix 1990 6x6 dual cab(This things staying)
If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
If you think you're in front on the deal, pay it forwards.
Hey Chris,
Best of luck with your rover. I had to get a engineering certificate because the chassis Number was different to the one on the plate. I'm in Victoria so the rules are different but still set me back $440. I'd say go to a different engineer, she clearly has it in for Rovers and isn't obeying the law. I'd contact AFM also to let them know, They might have insight and support you with some documents, I've herd they have done that in the past. Go elsewhere get it sorted then report her to SA govt or governing body i'd say if you can be bothered. If your RFSV has a compliance plate, the ADR's that are covered for that Vehicle will be listed, decipher them to see what is covered by the plate before pulling anything off!
Best of luck Mate!
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks