Results 1 to 9 of 9

Thread: Too hot?

  1. 24th January 2011, 08:39 AM #1
    fev Guest

    Too hot?

    Hi guys and gals,

    Just a quick question about how hot my centre console should get? I have a 95 v8 auto and the short section of metal at the bottom of the shifter gets very hot. Is this normal

    Cheers
    Reply With Quote Reply With Quote
  2. 24th January 2011, 08:57 AM #2
    PhilipA
    PhilipA is offline Swaggie Subscriber
    Join Date
    Jan 1970
    Location
    Avoca Beach
    Posts
    14,152
    Total Downloaded
    0
    yes.
    Regards Philip A
    Reply With Quote Reply With Quote
  3. 24th January 2011, 11:03 AM #3
    fev Guest
    Thanks, has no issues with it so assumed so but thought I'd better check.

    Thanks again
    Reply With Quote Reply With Quote
  4. 24th January 2011, 01:28 PM #4
    fev Guest
    While I'm thinking about temps, the Other day when the car was warm, it starte stalling everytime I stopped moving. Any ideas?
    Reply With Quote Reply With Quote
  5. 24th January 2011, 02:52 PM #5
    bee utey's Avatar
    bee utey
    bee utey is offline AT REST
    Join Date
    Apr 2009
    Location
    Crafers West South Australia
    Posts
    11,732
    Total Downloaded
    0
    Quote Originally Posted by fev View Post
    While I'm thinking about temps, the Other day when the car was warm, it starte stalling everytime I stopped moving. Any ideas?
    Base idle. Get a 3/16 inch allen key, engine idling,insert allen key into little cavity on top of inlet mainfold/throttle body, unscrew 1 or 2 turns. Stop unscrewing when your idle remains near 700rpm without dropping. IAC will take care of the idle from there.
    Reply With Quote Reply With Quote
  6. 24th January 2011, 04:41 PM #6
    fev Guest
    Idle is at 700 all the time , never had an issue with it before. It was when I ce to a atop, the reva would increase to about 1100 and then the engine would die. Lasted about half an hour then all returned to normal!?!

    Cheers,

    Phil
    Reply With Quote Reply With Quote
  7. 24th January 2011, 09:40 PM #7
    Ace's Avatar
    Ace
    Ace is offline Swaggie Gold Subscriber
    Join Date
    Jan 1970
    Location
    Bathurst NSW
    Posts
    14,445
    Total Downloaded
    0
    Are your fuel and air filters in good condition? Spark plugs, leads etc etc. Might just need a good service.
    <a href=https://the4wdzone.com.au/wp-content/uploads/logo.png target=_blank>https://the4wdzone.com.au/wp-content/uploads/logo.png</a>
    The 4wd Zone/Opposite Lock Bathurst
    263 Stewart Street, Bathurst, NSW
    http://www.the4wdzone.com.au/
    Discounts for AULRO members, just shoot me a PM before you purchase.
    Reply With Quote Reply With Quote
  8. 24th January 2011, 10:17 PM #8
    fev Guest
    Had a Full service about 4 months ago. Was thinking along lines of ht leads so will prob get em changed. In this week as I have no time to change a frame ball joint, will ask em to check fuel filter then. Cheers Ace
    Reply With Quote Reply With Quote
  9. 3rd February 2011, 08:15 PM #9
    rusty05
    rusty05 is offline Master Supporter
    Join Date
    Jan 2010
    Location
    NSW
    Posts
    151
    Total Downloaded
    0
    Quote Originally Posted by bee utey View Post
    Base idle. Get a 3/16 inch allen key, engine idling,insert allen key into little cavity on top of inlet mainfold/throttle body, unscrew 1 or 2 turns. Stop unscrewing when your idle remains near 700rpm without dropping. IAC will take care of the idle from there.
    This should fix it.
    Just needs a little increase in idle speed
    I've had this before when it was hot, slight increase in idle stopped it from hunting up and down.
    Reply With Quote Reply With Quote
« Alarm sensor removal | Brake hoses »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!