Page 4 of 4 FirstFirst ... 234
Results 31 to 38 of 38

Thread: Cruise Control Faulty

  1. 1st December 2008, 01:25 PM #31
    simonl8353's Avatar
    simonl8353
    simonl8353 is offline Master
    Join Date
    Jan 2008
    Location
    Grange, Adelaide
    Posts
    699
    Total Downloaded
    0

    Cruise Control vacuum hose

    Thanks guys for this thread.

    My D2 Cruise Control failed a couple of weeks ago and before reading this thread I had no ideas.

    Anyway, all fixed for $1.50 for a 10" piece cut off a roll at Supercrap on Saturday.

    Pity your issue wasnt so simple, best of luck with it
    Reply With Quote Reply With Quote
  2. 1st December 2008, 07:43 PM #32
    nzoliver's Avatar
    nzoliver
    nzoliver is offline Fossicker
    Join Date
    Dec 2007
    Location
    Christchurch, NZ
    Posts
    63
    Total Downloaded
    0
    Hmm
    D2s seem to only have hose issues. I haven't come accross any other fault the them. Yet.
    Reply With Quote Reply With Quote
  3. 6th November 2009, 07:25 PM #33
    roverv8's Avatar
    roverv8
    roverv8 is offline Master Subscriber
    Join Date
    Sep 2009
    Location
    Central Vic
    Posts
    683
    Total Downloaded
    0
    Well, ive read this thread from front to back and done the vac lines, brake switch, bladder on the throttle linkage, can here it clicking behind glovebox on & off.
    the vacum pump was not working, so i removed it and tested it on a battery and away it went.
    Used a test light on the wiring to the vacum pump and there is no power coming through even with the main C/Control switch on, fuse is fine.

    Any more tips??

    Thanks Luke
    Reply With Quote Reply With Quote
  4. 6th November 2009, 07:38 PM #34
    Lucus's Avatar
    Lucus
    Lucus is offline Master
    Join Date
    Mar 2007
    Location
    Perth WA
    Posts
    779
    Total Downloaded
    0
    you wont see power at the vacum pump until certain conditions are met.

    Cruise master on
    Brake switch off
    Signal from VSS indicating road speed higher the 45kph.

    Rave has a detail electrical test procedure, i would start with new relays tho
    Reply With Quote Reply With Quote
  5. 6th November 2009, 08:01 PM #35
    roverv8's Avatar
    roverv8
    roverv8 is offline Master Subscriber
    Join Date
    Sep 2009
    Location
    Central Vic
    Posts
    683
    Total Downloaded
    0
    Quote Originally Posted by Lucus View Post
    you wont see power at the vacum pump until certain conditions are met.

    Cruise master on
    Brake switch off
    Signal from VSS indicating road speed higher the 45kph.

    Rave has a detail electrical test procedure, i would start with new relays tho
    I hooked it all back up and went for a drive with no go.
    Where do i find this elec procedure??
    Reply With Quote Reply With Quote
  6. 8th November 2009, 03:42 PM #36
    Pierre
    Pierre is offline Wizard Silver Subscriber
    Join Date
    Jan 1970
    Location
    Blairgowrie, Vic
    Posts
    1,106
    Total Downloaded
    0
    RAVE 1 - electrical troubleshooting manual, cruise control.

    Get RAVE from the shop on this website - Dave's Interesting Things.

    Cheers

    Pete
    Dizzie, 08 D3 TDV6 SE
    Reply With Quote Reply With Quote
  7. 8th November 2009, 04:21 PM #37
    roverv8's Avatar
    roverv8
    roverv8 is offline Master Subscriber
    Join Date
    Sep 2009
    Location
    Central Vic
    Posts
    683
    Total Downloaded
    0
    Quote Originally Posted by Pierre View Post
    RAVE 1 - electrical troubleshooting manual, cruise control.

    Get RAVE from the shop on this website - Dave's Interesting Things.

    Cheers

    Pete
    Thanks, on Order
    Luke
    Reply With Quote Reply With Quote
  8. 22nd November 2009, 03:50 PM #38
    blackbuttdisco's Avatar
    blackbuttdisco
    blackbuttdisco is offline Master
    Join Date
    Dec 2008
    Location
    blackbutt qld
    Posts
    418
    Total Downloaded
    0

    Smile blackbuttdisco

    Just been to Perth and back, did over 12000km. Halfway there I finally found the fault with my cruise control. There is a relay which supplies power to the vent valve on the brake pedal assembly. The wires were broken on the switch. Has now worked ever since.
    Heater hose rubbed against engine but fixed that before disaster struck. Also had a wobble at the front wheels. Found an oil leak on the drivers side and the 6 bolts that hold swivel ball onto the axle were loose and that is where the oil was coming from. Tightened up the bolts and checked diff oil. Now ok. Also ran on LPG all the way from Brisbane to Perth. Came back a different way and had to run on petrol a few times.
    Reply With Quote Reply With Quote
Page 4 of 4 FirstFirst ... 234
« Replacing carpet with spray on rhino lining | D1 Front Locking problem query. »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!