Thread: Post a pic of your disco and mods

LoveB. Noticed your car here mate :P


I'd like to extend a warm thank you as your colleague Mark (I think) very generously donated me one of YOUR lower swivel pin screws. I hope he told you It got me out of trouble as I had a stripped out one and had to drive to the coast.


Anyway, I've got one in the mail and should be able to drop it off to you at work by tomorrow...


Have a good one.

So far i have done

2" lift kit, King Springs
Xrox Front Bar
Apt Fabrication rear bar and stubby Sliders
Dominator Winch
Rear Door Mod, removing the old panel and mounting chip board to allow for a table and a sneaky pocket, unfinished haha.
Home made storage unit in the boot.
Running 31" Toyo when i go to the Vic High Country
Safari Snorkel
Rhino Roof Racks

Next project is getting some Flares, so i can reduce some scrubbing, but they are so expensive

Looking good, question?, do your stubby rock slider bolt up like normal ones ? I like the look of them ...thanks Gary

Hi Ryno
You dont need flares to stop 31's from scrubbing - do a search on 'camel cut' there is plenty of info in here on that topic.

Originally Posted by Gary S11

Looking good, question?, do your stubby rock slider bolt up like normal ones ? I like the look of them ...thanks Gary

Hey Gary, The sliders are great, they bolt on, you have to drill out a couple of holes, if you want some decent bolts through them, they are a sandwich style plate. just a couple of trolley jacks to hold it in place while you bolt them in. Easy install. Here is a pic of the plate on one side, during the install.



and Ed, thanks for the info, i looked into the camel cut a little bit. But i am kind of swayed by the aesthetics of the Flares, i reckon they look nice and mean.

Cheers

Ryan

Well here's, a few pics of my rig. I've a got a before pic (minus the masking tape etc) But it's a 92 2 Door 3.5L V8. Duel Batt's, DVD Player, 80ch UHF, CD/Mp3 Player, Nav System, Ironman 2inch Lift, Castor Corrected Bushes, Front Sway Bar Removed, Custom Bullbar, Guards Cut, Rubber Flares, 33inch Maxxis Bighorns on 15x8 Dynamics with -22 Offset, Custom Paint, Airflow Snorkel, Alloy Roof Cage on Rhino Racks. That's all I can think of at the moment.

Its a work in progress, want to put some under body protection on it, rock sliders, have a 24inch lightbar here I have to install soon, will change cv's sooner or later depending on how quick I snap them, and fiddle around with a few more things.

Flares don't have to be expensive Rhyno, depending on what your happy with. I put mine on my self, paid $120 for 6m of 75mm sidemount flare rubber, a packet of rivets and and afternoon on the grinder, drill and rivet gun.

Cheers

Interesting colour scheme there Mik.