Page 2 of 2 FirstFirst 12
Results 11 to 20 of 20

Thread: Second Year of D2 Ownership

  1. #11
    HarleyPup Guest

    Travelling d2a

    Hey Steve

    Thanks for that great advice and to rambling boy. That gives me a lot of confidence.

    My mechanic is great so will ask him to check over and replace, i am doing day trips and will work up weekends etc.

    My mate is getting a new Landcruiser Dual cab v8 diesel so i dont want to break down beside him!

    Should I source some 16" steel wheels for travelling on rough tracks , corrugations in the D2a or will the factory alloys be fine?

    If so which steel wheels fit? Will the Discovery 1 steel 16" fit a 2003 D2a?

    Thanks again Iain

  2. #12
    Join Date
    Jan 1970
    Location
    Perth WA 6149
    Posts
    1,308
    Total Downloaded
    0
    Hi Iain

    Disco one rims won't fit. Stud pattern and size are different.

    I wouldn't worry too much about steel rims. Alloys with good tyres will be just fine and if 16" perfect. That said if you have 18" fitted I wouldn't obsess about changing them. Maybe buy a second tyre and rim from a wrecker or off gumtree though.

    And don't get me started on v8 toyotas and reliability...... Had an interesting job out of Alice last year with electrical issues in a brand new land cruiser wagon. Took 3 goes to get out of town and 2 trips to the Toyota dealer.

    Cheers

    Steve

  3. #13
    Join Date
    Apr 2012
    Location
    Orange, NSW
    Posts
    7,965
    Total Downloaded
    0
    D2 alloys will be fine.
    Don't bother with steels
    The Phantom - Oslo Blue 2001 Td5 SE.
    Half dead but will live again!

    Nina - Chawton White 2003 Td5 S
    Slowly being improved

    Quote Originally Posted by Judo View Post
    You worry me sometimes Muppet!!


  4. #14
    HarleyPup Guest
    Thanks Steve and Disco Muppett

    I have the factory 16" alloys with Cooper Discoverer all terrains but i will pick up a second alloy as a spare thats a great tip thanks

    Iain

  5. #15
    Join Date
    Oct 2011
    Location
    Fremantle WA
    Posts
    3,839
    Total Downloaded
    0
    Quote Originally Posted by HarleyPup View Post
    Hey Steve

    My mechanic is great so will ask him to check over and replace, i am doing day trips and will work up weekends etc.

    Thanks again Iain
    Hi Iain. A bit after the event, but care to share who your mechanic is? PM is fine if you are a bit diffident. Cheers Gavin
    D4 MY16 TDV6 - Cambo towing magic, Traxide Batteries, X Lifter, GAP ID Tool, Snorkel, Mitch Hitch, Clearview Mirrors, F&R Dashcams, CB
    RRC MY95 LSE Vogue Softdash "Bessie" with MY99 TD5 and 4HP24 transplants
    SADLY SOLD MY04 D2a TD5 auto and MY10 D4 2.7 both with lots of goodies

  6. #16
    Join Date
    Oct 2007
    Location
    Brisbane West
    Posts
    7,373
    Total Downloaded
    0
    Quote Originally Posted by ramblingboy42 View Post
    Once you become familiar with these vehicles you have no qualms about going anywhere in them.

    Mine is now 15yrs old and I'm about to prepare for my 16th trip through the SA deserts up down or across the Srezleckie/Oodnadatta/Birdsville tracks.

    How shall I prepare? Make sure all services are up to date. I'll have new dampers on this trip , as the others wore out. also a new front prop shaft.Other than that basically a walk around. Nothing really goes wrong with it.

    As the hair ads say ..."have the confidence tomorrow"
    They are a great vehicle until they stop dead. Unfortunately any computer controlled car over 10-15 years is on borrowed time. I just had to replace the BCU because it had a problem (probably in the board) and the vehicle simply would not start. THat can happen anywhere, anytime. I still love it and it will not stop me going to remote locations (OTT next year and Simpson following year) but these things can happen and will happen the older the vehicle gets. Lots of sensors, lots of computing going on.

    Cheers

  7. #17
    Join Date
    May 2003
    Location
    On The Road
    Posts
    30,031
    Total Downloaded
    0
    Here's NASA's thoughts on computational redundancy--

    http://history.nasa.gov/computers/Ch4-4.html

    something car manufacturers could well think about,,
    "How long since you've visited The Good Oil?"

    '93 V8 Rossi
    '97 to '07. sold.
    '01 V8 D2
    '06 to 10. written off.
    '03 4.6 V8 HSE D2a with Tornado ECM
    '10 to '21
    '16.5 RRS SDV8
    '21 to Infinity and Beyond!


    1988 Isuzu Bus. V10 15L NA Diesel
    Home is where you park it..

    [IMG][/IMG]

  8. #18
    Join Date
    Jan 1970
    Location
    Brisbane, Queensland
    Posts
    5,778
    Total Downloaded
    0
    Quote Originally Posted by ozscott View Post
    They are a great vehicle until they stop dead. Unfortunately any computer controlled car over 10-15 years is on borrowed time. I just had to replace the BCU because it had a problem (probably in the board) and the vehicle simply would not start. THat can happen anywhere, anytime. I still love it and it will not stop me going to remote locations (OTT next year and Simpson following year) but these things can happen and will happen the older the vehicle gets. Lots of sensors, lots of computing going on. Cheers
    So do you think have a new BCU & ECU on hand at around the 10-15 year mark? I'm genuinely interested as my leased RRV will be 12 years old at the end of the lease. These components could be one of the last items to buy before the lease ends.
    L322 tdv8 poverty pack - wow
    Perentie 110 wagon ARN 49-107 (probably selling) turbo, p/steer, RFSV front axle/trutrack, HF, gullwing windows, double jerrys etc.
    Perentie 110 wagon ARN 48-699 another project
    Track Trailer ARN 200-117
    REMLR # 137

  9. #19
    Join Date
    Jan 1970
    Location
    Perth WA 6149
    Posts
    1,308
    Total Downloaded
    0
    Yes ECU/BCUs can fail, but I haven't seen much evidence for it being a systemic problem on the forums here.

    In the D2 world I'm reading more about auto transmission, fuel pump, MAF sensor, fuel pressure regulator, front drive shaft, door lock and window actuator failures.

    Each car has their own weak spots, so if you are buying insurance spares, play to these weak spots in the first instance. There are plenty of components that can fail on a car and strand you, but we can't carry them all

    After this if you plan on keeping the car, then buy parts which are likely to become or are NLA.

    As an example my Alfa is 30 years old and except for a fuel relay the year after I bought it, the ECU and other electrical boxy bits are still original and the only time I needed a tow truck was when the clutch slave cylinder failed. That said a can of contact cleaner has been a blessing in restoring functionality of some electrical systems over the years

    Cheers

    Steve

  10. #20
    Join Date
    May 2015
    Location
    Williamstown, Victoria
    Posts
    3,246
    Total Downloaded
    0
    Quote Originally Posted by clubagreenie View Post
    For $25- you can get a cover from ebay shipped with thread and needle. Good quality, a few people, including myself have used them.
    x2 and they look really good.
    D2a Td5 Manual, Chawton White. aka "Daisy"
    Build date 11th Oct 2003
    Freelander 2 2011, manual, the daughter calls it Perri
    Before I had a Land Rover I did not have any torque wrenches. Now I have three.
    LROCV #1410

Page 2 of 2 FirstFirst 12

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!