What happened to your Discovery 2 today?

Quote:

---

Originally Posted by ballbag

Put a screw through it to act as a new tab and put the bastard back in[emoji106]

---

UGH!!![emoji37]

Quote:

---

Originally Posted by gusthedog

Or silicon. Mines been siliconed in for 6 years now [emoji12]

---

.... my first thought too [emoji4]

Quote:

---

Originally Posted by Roverlord off road spares

Did you mange to get a template for the snorkle?

---

Made a paper template from the car the snorkel came off.

got it all together and celebrated with a run over Jeffrey's Track with my brother and his D1.

Attachment 136086

Attachment 136087

Attachment 136088

Quote:

---

Originally Posted by Carnut1100

Made a paper template from the car the snorkel came off.

got it all together and celebrated with a run over Jeffrey's Track with my brother and his D1.

Attachment 136086

Attachment 136087

Attachment 136088

---

good that's what I did on mine re template. those safaris are so much better t5han the cheap generic stuff but scarce to get second hand.

Quote:

---

Originally Posted by Mclaren00

1 week Longest I haven’t had my three mates in the car after last service but today they jump back in hahaha
Give it a clear with the nanocom I see how long this time

---

What's the code say?? Shuttle valve?
Have you done opting B bypass?

Lemo

Yer it’s shuttle valve
Na not done it yet as I’m lazy hahah

Quote:

---

Originally Posted by onebob

Today I broke the tension lock tab off my driver side front quarter panel repeater lamp (aka blinker lamp) and it now needs ugly duct tape to hold it in place. Now i could just go to a wrecker and get another aged and similarly fragile replacement or research a new perhaps LED alternative .... How have other forum members dealt with this ...

---

Well i decided that the silicone adhesive solution was the painless way to go and cos i didn’t want to have to remove the assembly ever again i installed LED globes in place of the original filament ones [emoji1360]

Drove up the Tolbar Range to Toowoomba. 30 degrees ambient. Down to 60 in a few sections with slow traffic. Squeeze throttle in 4th (manual) and just pulls away at 60. Went from 85 c coolant temp on highway to 87 half way up and didn't increase.

Cheers

Fixed the key fob - had to re solder one of the buttons back onto the circuit board.
Changed key and electronics into new cases (sorry bought that long ago can not remember where I got them from)

Quote:

---

Originally Posted by onebob

.... my first thought too [emoji4]

---

Harden up lads[emoji106]

https://www.aulro.com/afvb/images/im...018/02/281.jpghttps://www.aulro.com/afvb/images/im...018/02/282.jpg