What happened to your Discovery 2 today?

Finally ordered my Delios disc rotors, will be here next week.

It's only taken me 2.5 months [bigwhistle]

I replaced the rubber drive on the rear prop to diff. Took a good bit of time to get the centre bush out. Luckily I have a die grinder and ground it down until it weakened enough to pull out with multigrips. The old one was cracked.

Quote:

---

Originally Posted by rick130

Finally ordered my Delios disc rotors, will be here next week.

It's only taken me 2.5 months [bigwhistle]

---

Through Todd ?

Quote:

---

Originally Posted by gusthedog

Maiden voyage on the weekend with the kids. Went to Howqua Valley Resort - about an hour from home. Van towed well. Disco purred along as usual.

Thought I was going well until I got passed by a Mitsubishi Triton towing a van twice the size of ours [emoji32]. I drive by the EGT though and don't like to push it higher than 650. Was sitting at about 75kph up a decent climb and about 590 Celsius on the guage. Happy with that.

Does my ass look big towing this van? [emoji23]https://www.aulro.com/afvb/images/im...018/02/130.jpg

---

YES[emoji23][emoji23][emoji23]

Well, getting the ‘new’ D2a ready for our new adventure has had its moments..... A slight whistle told me that I needed to replace the manifold gasket. What a **** of a job THAT is[emoji35]. After getting everything off, I discovered the source of the whistle.... the probe for the egt gauge (which doesn’t work anyway) was loose[emoji35][emoji35][emoji35][emoji35]
Anyway, it’s now done as well as a replacement front shaft from Hardy Spicer (greaseable). Apart from running another Anderson plug to the cargo area for the Waeco, it’s all set to go. Couple of Anderson’s and a battery to the caravan and we’re GONE[emoji3]

Quote:

---

Originally Posted by wardy1

YES[emoji23][emoji23][emoji23]

---

It must just be the angle [emoji12] it's not that big in real life! Honest! [emoji23]

Quote:

---

Originally Posted by gusthedog

It must just be the angle [emoji12] it's not that big in real life! Honest! [emoji23]

---

You 2 be careful now [bighmmm]

Quote:

---

Originally Posted by wardy1

Well, getting the ‘new’ D2a ready for our new adventure has had its moments..... A slight whistle told me that I needed to replace the manifold gasket. What a **** of a job THAT is[emoji35]. After getting everything off, I discovered the source of the whistle.... the probe for the egt gauge (which doesn’t work anyway) was loose[emoji35][emoji35][emoji35][emoji35]
Anyway, it’s now done as well as a replacement front shaft from Hardy Spicer (greaseable). Apart from running another Anderson plug to the cargo area for the Waeco, it’s all set to go. Couple of Anderson’s and a battery to the caravan and we’re GONE[emoji3]

---

Do you want me to let the cat out of the bag or will i just go along with your description of a ***** of a job:Rolling:
Anyway well done mate it will be glad to hear how that thing made a breeze of the task ahead of it :burnrubber::BigThumb:

Quote:

---

Originally Posted by rick130

Finally ordered my Delios disc rotors, will be here next week.

It's only taken me 2.5 months [bigwhistle]

---

Nice I need to do rotors and pads soon what’s the damage on them mate

With my new toy(nanocom) and the top help in diagnosing what all the numbers mean from this forum, got a new maf off Landy nut and fitted tonight apart from filling her up has to be one of the easiest jobs hahahaAttachment 136228Attachment 136229