What happened to your Discovery 2 today?

Quote:

---

Originally Posted by DiscoDiscoMan

I am planning on installing a UHF aerial with a Am/FM splitter in an attempt to get better radio reception.
Any ideas on how to remove the stereo head unit without the special tools?
Or is the aerial plug easy to find under the dash without taking out the head unit?

https://www.aulro.com/mobile-gallery...0c43b57fc1.jpg

---

Ive used metal cable ties before on some head units, otherwise you can buy the tools from SCA. Knowing LR either would work lol

Quote:

---

Originally Posted by DiscoDiscoMan

....
Or is the aerial plug easy to find under the dash without taking out the head unit? .....

---

I'm pretty sure(as in 99.9%) that's an impossible task.
I've only pulled brothers TD5 radio out briefly(to locate rattles and squeaks), and it seems much the same as the D1 layout, which IS impossible to fit aerial plug without removing unit.

The top dash 'vent looking' strip, forward of the small dash mat doesn't access far enough rearwards of the unit underneath to allow access .... and I think there's a metal cage under there anyhow.

Quote:

---

Originally Posted by DiscoDiscoMan

I am planning on installing a UHF aerial with a Am/FM splitter in an attempt to get better radio reception.
Any ideas on how to remove the stereo head unit without the special tools?
Or is the aerial plug easy to find under the dash without taking out the head unit?

https://www.aulro.com/mobile-gallery...0c43b57fc1.jpg

---

IIRC I jut bent some hooks up with welding wire?

Picked up a D2 t/case today that has this in it.
https://uploads.tapatalk-cdn.com/201...f2ef658f4a.jpghttps://uploads.tapatalk-cdn.com/201...bfa9a4f1f2.jpg

Nice spigot Rick.

Cheers

Where is all.the oil Rick?

If that is out of a pre 2002 it is interesting that the lock switch is bridged, so the light will not come on, without the wires being added up to the loom in the console underneath the power window switches.
Regards Philip A

Quote:

---

Originally Posted by PhilipA

If that is out of a pre 2002 it is interesting that the lock switch is bridged, so the light will not come on, without the wires being added up to the loom in the console underneath the power window switches.
Regards Philip A

---

I think it's out of an '03-04, it's a 68D

Just a shame the mechanism has gone.
I think I'll use the nose housing out of this with an ATB in my case

Quote:

---

I think it's out of an '03-04, it's a 68D

---

So I wonder why the diff lock switch is bridged?

Regards Philip A

Quote:

---

Originally Posted by ozscott

Where is all.the oil Rick?

---

It's as clean as a whistle, isn't it!

I haven't looked inside it yet, but the bloke that had it said it drove well before wrecking the car.