What happened to your Discovery 2 today?

I started it up drove to bunnings and came back home and parked it.:D

Quote:

---

Originally Posted by Pedro_The_Swift

Finally refitted cloned 4.6 ECM,, you guys seriously dont know what your missing,,,:cool:

LTFT's very low single figures,,
:banana::banana::banana::banana::banana::banana::b anana::banana::banana::banana::banana::banana::ban ana::banana:

---

a heavy fuel bill :D:p:D:wasntme:

at 60 cents a litre who cares??:p

But it's still a GAS guzzler :p

Sent by iPhone using two tin cans and Forum Runner

Quote:

---

Originally Posted by Nomad9

Hi There,
So what did I do today............... I removed the spigot bearing out of the crankshaft with a piece of bread. Saw this being done on YouTube however doubted this as authentic until this afternoon. One piece of wholemeal bread, broke it up and then pushed it into the hole, then pushed a drift down the centre with some persuasion with a copper hide mallet.

Amazingly the bush just pushed out. Dug the bread out with a small pick, cleaned the hole up with a small piece of emery, no damage at all, perfect. Wouldn't have believed it if I hadn't done it myself. Very impressive.

---

Hmm. I always used grease, but I guess the principle is the same.

Quote:

---

Originally Posted by Pedro_The_Swift

at 60 cents a litre who cares??:p

---

Yours (guessing per km)
$0.60 x 16 = $9.60

Mine
$0.98 x 10 = $9.80

Doesn't seem to be a problem from my side!!!
Similar cost per 100km, no fiddly gas tank eating GVM.
And I can carry 190L of the stuff in tank....

Quote:

---

Originally Posted by johntins

Hmm. I always used grease, but I guess the principle is the same.

---

But he could eat his for lunch after he removed the pin [emoji41]

Quote:

---

Originally Posted by Tombie

Yours (guessing per km)
$0.60 x 16 = $9.60

Mine
$0.98 x 10 = $9.80

Doesn't seem to be a problem from my side!!!
Similar cost per 100km, no fiddly gas tank eating GVM.
And I can carry 190L of the stuff in tank....

---

Not to mention the initial cost of the conversion :angel:
But they do get that oh wow feeling of the bent 8 noise when they boot it add`s to the fun factor .
What have we got a rattly diesel with power and economy :angel:

A TD5 spooling up through a nice open system is pretty sweet as well...

Got the boys to do a major service, turns out I have three distinct coolant leaks. Cooling system overhaul may happen sooner rather than later!

Planning on doing the injector seals (and replacing the loom while the rocker cover is off) soon too.