Thread: What happened to your Discovery 2 today?

Filled it with diesel, put a trailer on it. Put tools and a Nanocom in it and drove to Adelaide.

Sent from my SM-N910G using AULRO mobile app

The fuel filler flap was not closing properly I had a look and straightened the latch plate. All good now.

Sent from my SM-N910G using AULRO mobile app

Hi There,
Today was the final episode installing the recon gearbox and the CDL transfer case. Bit of a marathon but everything now works as it should do, and it is quiet.

The nudge bar was looking decidedly average and had rusted through at the two attachment points, I had a new bar welded into replace the old one and had the bar colour coded to the vehicle, looks pretty smart even if I do say so myself.

Next project, head off and service, plus replace the timing chain tensioner guide thing.

Cheers Marty

Nice idea colour coding the nudge bar. Looks good.

fitted one of those turbo blankets as heat shield was stuffed.

Hi Stevo,
Which one did you get? Where from and how much? What size, does the T25 fit the Discovery turbo?

Cheers Marty

Originally Posted by stevo

fitted one of those turbo blankets as heat shield was stuffed.

Couple of tips..

Just remember to spool down properly after a drive..
The blanket keeps the heat in and can Coke up the oil if not allowed to cool sufficiently.

And if you do water crossings and it gets wet make sure it gets a good enough run to dry out after.

Originally Posted by Outback 1

having withdrawal symptoms jc

I still have fond memories of mine,my first "modern" Landy.
Oneday I would like to build a D2a trayback ute
Andrew