Got a set (3) 210mm rhino racks off gumtree at a fraction of new cost!!!
Pays to check everyday for bits and bobs
Got a set (3) 210mm rhino racks off gumtree at a fraction of new cost!!!
Pays to check everyday for bits and bobs
not a total loss.
go the thingimabob assembly out and took the oil sump off.
20170430_142509.jpg20170430_173432.jpg
Current Cars:
2013 E3 Maloo, 350kw
2008 RRS, TDV8
1995 VS Clubsport
Previous Cars:
2008 ML63, V8
2002 VY SS Ute, 300kw
2002 Disco 2, LS1 conversion
Decided to go with the drill 6 new holes and shuffle up (only needed 10 mm to make the rubber fit) instead of flipping the carrier.
My thinking was 6 holes are as easy as 2 if the mount is off anyways, and there must be some logic behind the 2 top, 1 bottom stud configuration. Happy with the result.
IMG_0327.jpgIMG_0326.jpg
Certainly is... simple engineering
 Swaggie
					
					
						Subscriber
					
					
						Swaggie
					
					
						SubscriberI think I would have welded some flat plate behind each of the sections where the bolts go through and welded into the old holes.
Seeing they can crack anyway , the lack of meat between the new and old holes to me is worrying.
Anyway , see how it goes and keep and eye on it, particularly on corrugations. There is that old YouTube of the Nissan Patrol with 2 spares hung off his carrier dropping the lot on the Simpson.
Regards Philip A
| Search AULRO.com ONLY! | Search All the Web! | 
|---|
|  |  | 
Bookmarks