The LT230 can get pretty warm.
I took some IR temp readings years ago just burling down the highway and was surprised, can't recall exactly now.
Djam's post gives some temps
https://www.aulro.com/afvb/90-110-13...mperature.html
I had the LT230 sump extension on my 04 D2a, and the current interest is cos I'm planning to convert my BW Viscous Coupling on the LSE to a LT230, and will do the same again with the sump extension.
Have to admit, hadn't until recently considered a temp gauge could possibly be warranted as well, and would probably put it in the same category as an engine oil temp gauge?
D4 MY16 TDV6 - Cambo towing magic, Traxide Batteries, X Lifter, GAP ID Tool, Snorkel, Mitch Hitch, Clearview Mirrors, F&R Dashcams, CB
RRC MY95 LSE Vogue Softdash "Bessie" with MY99 TD5 and 4HP24 transplants
SADLY SOLD MY04 D2a TD5 auto and MY10 D4 2.7 both with lots of goodies
The LT230 can get pretty warm.
I took some IR temp readings years ago just burling down the highway and was surprised, can't recall exactly now.
Djam's post gives some temps
https://www.aulro.com/afvb/90-110-13...mperature.html
Arthur.
All these discos are giving me a heart attack!
'99 D1 300Tdi Auto ( now sold :( )
'03 D2 Td5 Auto
'03 D2a Td5 Auto
Decided to part it out and put it in the wrecking section![]()
Weird happenings today.
picked up new old Coromal Seka pioneer Xc from Yarrawonga.
on Hume returning to Sydney and all of a sudden no boost and very high EGTs.
pulled ove and started checking bloody hot engine. Boost hoses looked Ok so suspected wastegate jammed open. Turbo looked Ok no oil or play. Suddenly noticed thread on wastegate activator screwed right out so screwed down to about 12 turns. I reconnected modulator as didn’t. Know if turbosmart also a problem.
Anyway all well and good boost and EGTs
must have been loosening for months but no boost happened suddenly although I have noticed less maximum boost for a while
regards PhilipA
Coromal Seka pioneer Xc, is that some sort of outdated missile launcher, Philip?![]()
If you don't like trucks, stop buying stuff.
Today I removed the mud terrains and put on the all terrains, aka high way tyres. The fridge and drawers were also removed. The coolant was dumped, about 75% water and 25% concentrate. The cooling system was flushed with Penrite radiator flush. New coolant at the correct mix was put in. This took all after noon. And I buggered a wheel nut. I cross threaded it and know it will not go on straight. I think I need a new one as I don't think that this can be fixed.
I also replaced the rocker cover gasket, the front bore hole seal and the rocker cover sealing washers. This time I bought genuine. I hope that these last longer than the 8 months that the ‘OEM’ lot lasted.
D2a Td5 Manual, Chawton White. aka "Daisy"
Build date 11th Oct 2003
Freelander 2 2011, manual, the daughter calls it Perri
Before I had a Land Rover I did not have any torque wrenches. Now I have three.
LROCV #1410
It always a good day when something has arrived from uk![]()
![]()
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks