Thread: hill decent not working

Originally Posted by ozscott

Ooohhh...tell me how to do this little time sapping mod!

You have to splice in with a switched live into the reverse input to C0504-7 as to make the SLABS "think" it's in reverse then the minimum target speed becomes 5.6km/h.... the reverse lights will come on with a simple switch(wasnt a problem for me) but if you want them to rest you'll need a two way on/off/on toggle switch to route the original circuit through one contact and the live through the other as when you switch the live to the SLABS the link to the lamps to be interrupted if you see what i mean... i simply swicthed the live to it and didnt bother about the reverse lamps being on with HDC

Originally Posted by rangieman

I dont think it has anything to do with practise , It is crap .
My taller tyres would play havoc as the speedo is now 10% slower
Anyway even with standard height tyres it was way too fast for my liking

Mine must work different to yours then because I find it is too slow, except on the steepest of hills, once it finally kicks in.
I haven't been spoilt by newer and better versions however.

None of this is helping the original post thou

Originally Posted by RobMichelle

None of this is helping the original post thou

Sure it is- HDC is rubbish -no need to find out why it isnt working...although I have a theory the 4wd action boys may have designed the parameters

Laney,
It was asked earlier if you heard beeps when pressing HDC in Hi range.
Firstly an obvious question. Are you engaging the HDC correctly i.e in low range when attempting to use HDC?
Secondly if the above is correct- recommend someone plug in their Nano for you and check settings/faults and outputs.
HDC may be disabled in the settings or the HDC relay may be faulty.

cheers