Thread: Help needed in Halls creek (again)

Are you still in Darwin and have the hose's . ? I have a hydraulic guy we use who makes hose's , I could get him to have a look and see if its possible. He would need hose's to work off so the old set if you still have them. No guarantee but well worth a try.

Give me a call tomorrow if you want to give it a try 0418 893 424


Cheers Ean

Adrian, if I remember, I'll check with MRAutomotives tomorrow for their perspective. I need to chat with them anyway about some other parts.

Wonder if any of the vendors here can advise and provide.

Interestingly those D2 auto hoses we removed ran for the most part the same route as hoses on a D1 TDi300 auto. The only real difference seemingly being the (poxy) garden hose fitting style termination (that we wrestled with for hours) to a cooler sandwiched between your aircon and engine radiator. I still have that D1 v8 cooler if you end up needing something.

Do you remember me mentioning I was having some tractor hydraulic hoses made up. Well, the same guy is refurbishing for me a set of lines to suit the D1 TDi300 auto, such that I no longer have to buy complete units when they wear out, just replace the rubber bit in between the steel ends - good old two spanner set ups. If Ean's lead does not work out then we can talk to the guy I'm using.

Just off the phone to MRAutomotives. Apparently the hoses for the V8 are no longer listed in something called the Microcat, sounds like a catalogue of all things automotive. Suggestion was you may need to get the hoses out of the UK, ie Paddocks.