Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Broken Down in Nelson Bay NSW

  1. #1
    Join Date
    May 2012
    Location
    Adelaide Hills, SA
    Posts
    564
    Total Downloaded
    0

    Broken Down in Nelson Bay NSW

    Just driving down the road then the engine ran rough then stopped.

    Checked the red connection to the ECU, full of oil.

    When cleaned out is it likely to go again or will I need a computer?

    Bugger

    Mike

  2. #2
    Join Date
    Oct 2009
    Location
    Hunter Valley
    Posts
    962
    Total Downloaded
    0
    Quote Originally Posted by nismine01 View Post
    Just driving down the road then the engine ran rough then stopped.

    Checked the red connection to the ECU, full of oil.

    When cleaned out is it likely to go again or will I need a computer?

    Bugger

    Mike
    Is your fuel pump running
    It doesn't leak oil, Its sweating power

  3. #3
    Ean Austral Guest
    Clean that end and also the plug end on the front corner of the engine . It's a round plug from memory on the front drivers side .

    should not need a new ECU .

    cheers Ean

  4. #4
    Join Date
    May 2012
    Location
    Adelaide Hills, SA
    Posts
    564
    Total Downloaded
    0

    No power

    Right now it has no power but the fuel pump is running with ignition on.
    Next?

  5. #5
    Ean Austral Guest
    Does the engine crank at all. ?

    cheers Ean

  6. #6
    Join Date
    May 2012
    Location
    Adelaide Hills, SA
    Posts
    564
    Total Downloaded
    0

    Slowly slowly catchee monkey.

    Quote Originally Posted by Ean Austral View Post
    Clean that end and also the plug end on the front corner of the engine . It's a round plug from memory on the front drivers side .

    should not need a new ECU .

    cheers Ean

    Cheers, waiting for the NRMA, I don't have the right tool to take the top off the computer nor the terminal cleaning spray.

    Thanks for the heads up on probably not needing a pooter.

    Cheers

    Mike

  7. #7
    Join Date
    May 2012
    Location
    Adelaide Hills, SA
    Posts
    564
    Total Downloaded
    0

    Oh ****! egg all over my face

    Stand down guys.
    NRMA came and I taught him something about Land Rover.
    We cleaned every connector up but still it would not go.

    I'M OUT OF FUEL!!!!!!!!!!!!!!

    THANKS ALL WHO MADE SUGGESTIONS.


    Oh what a dill!

    Mike

  8. #8
    Ean Austral Guest
    Oh well it could have been much much worse .

    from memory it's a pain trying to bleed the D2 - got to turn the ignition on/off/on 8 times or something like that.

    Have a merry Christmas

    Cheers Ean

  9. #9
    Join Date
    Nov 2014
    Location
    Nirvana near Albany W.A.
    Posts
    2,480
    Total Downloaded
    0
    hopefully no next time ...... but if there is turn ign on and press acc pedal to floor 5 times, the engine light will then flash on the dash and it will self purge , will take a few minutes to cycle the pump , this time can be used to contemplate the timely use of service stations
    have a safe and merry christmas all

  10. #10
    Join Date
    May 2015
    Location
    Williamstown, Victoria
    Posts
    3,244
    Total Downloaded
    0
    An easy fix, and bleeding is a simple affair.
    D2a Td5 Manual, Chawton White. aka "Daisy"
    Build date 11th Oct 2003
    Freelander 2 2011, manual, the daughter calls it Perri
    Before I had a Land Rover I did not have any torque wrenches. Now I have three.
    LROCV #1410

Page 1 of 2 12 LastLast

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!