If you have the clearance straight out of the unit into the muffler then no dramas there. It would have ended up too close to the ground on mine had I done that, but there is no reason you can’t no. My unit is mounted close to the LH wall near the door. The exhauset then goes towards the centre of the van, with the muffler on the end which exits just past halfway across the van.
Was going to take pics of mine but there was nothing to see - the hole I cut was approx 63 x 150mm overall - I used a 63mm holesaw in 2 places and cut out between them - the metal plate that the unit mounts on covers it all up and gives around 20mm clearance from and timber to the exhaust.


Reply With Quote





Bookmarks