Show us your Disco / Sport! - PLEASE READ FIRST POST, FIRST

**ScottyD** · 24th July 2018, 04:55 PM

I figured it was time for some more recent pictures.
The old girl doing some work post black plastidip applied to:

Front Grill
Bonnet lettering ('Land Rover')
Side Grills
Mirrors (just the white bits)
Door Handles (which need a tidy up, I suspect they went into service too quickly and it started to peel a bit)

20180630_121841.jpg 20180630_131747.jpg

**NathGC** · 24th July 2018, 08:16 PM

Originally Posted by ScottyD

Hi Nath,

They are the Green Oval Experience (GOE) alloy sliders. I've given them a good bash with nothing giving way other than the paint. Others have told me they have bent under very large impacts. For me they have been a good compromise between light weight and sill protection.

Scott.

Thanks Scott - I Thought they where given how far out they seemed. Thanks for letting me know. Order goes in this week for a set.

**NathGC** · 24th July 2018, 08:18 PM

Originally Posted by ScottyD

I figured it was time for some more recent pictures.
The old girl doing some work post black plastidip applied to:

Front Grill
Bonnet lettering ('Land Rover')
Side Grills
Mirrors (just the white bits)
Door Handles (which need a tidy up, I suspect they went into service too quickly and it started to peel a bit)

20180630_121841.jpg 20180630_131747.jpg

Funny you posted this tonight as I have been trying to decide on ordering a new set of grills vs Plastidip. Are you happy with the finished product? What’s the adhesion like? And depth (microns) of the plastidip? Any recommendations on where to get it organised?

**ScottyD** · 25th July 2018, 07:31 AM

Originally Posted by NathGC

Funny you posted this tonight as I have been trying to decide on ordering a new set of grills vs Plastidip. Are you happy with the finished product? What’s the adhesion like? And depth (microns) of the plastidip? Any recommendations on where to get it organised?

Hi Nath,

I'm very happy with the finished product, its been on for 3 months now. The only exception is the door handles which get a lot of wear and I suspect I didn't let dry long enough. Adhesion is excellent. The depth, not sure on the measurements, but it is matt black genuine plastidip off ebay, with about 6 coats on everything for a thicker finish. More lighter coats is better than less heavy coats. Its not a hard job to do yourself too, pretty much everything comes off easily, the only pain being the door handles (the smaller part). The letters I did on the car. The Grills need a bit of effort to pull out. I didn't even use 2 cans in the end.

Scott