Thread: Reversing Camera to D4 with touch Screen

Thanks. Is this with a Nanocom? I presume the Autologic system will have the same approach. So it's these two files to activate - do the % mean anything?

Hi,

Yes, with Nanocom. 2 settings

You can ignore the % - just shows percentage of vehicles with that setting AsBuilt.

btw happy to help but when a thread link is provided you might want to take the time to look at it. Will save you time. In the thread I've referenced it says:

"CCF changes (Nanocom settings below)"


David

Many thanks. Have looked through various theads on this topic here and the Disco3 site, but some mention Faultmate, others Nanocom, typically I only have access to an Autologic system to alter the CCF so really want to see if they all work the same way. Cheers

Originally Posted by HQU

Many thanks. Have looked through various theads on this topic here and the Disco3 site, but some mention Faultmate, others Nanocom, typically I only have access to an Autologic system to alter the CCF so really want to see if they all work the same way. Cheers

Understand, no worries. Let us know how you go. You're just about there I reckon.

Will do - thanks again

If you are getting a scrambled picture in the secret menu chances are you have a PAL camera, on my car a PAL camera will not work and I get a scrambled picture.

That said with the CCF set to parking camera "fitted" you should get that same scrambled picture when the car is in reverse.

I thought the same and checked the camera. It says NTSC. I found in another thread on the Disco3 site, much the same problem but they seemed to sort by fiddling with the CCF. I'm going to see if I can find someone who can give that a go for me.

This may help. From early in Chris' thread: http://www.aulro.com/afvb/l319-disco...install-3.html

"It turns out that when accessing the camera (from the same connector at the rear of the touch screen) from the service menu it requires the video feed in PAL format. When accessing when in reverse it wants the video feed in NTSC format!! "

I found this too - scrambled from service menu but fine when in reverse, once CCF changes were right. Camera NTSC

David