Thread: Reversing Camera to D4 with touch Screen

Can anyone confirm the parts numbers for the OEM: camera, microswitch with camera wiring and tailgate loom with camera wiring (does this reach all the way from the tailgate handle up to the Fakra and power connectors behind the rear courtesy light?). I have seen different numbers on this and the UK Disco 3 site with a similar thread. MY12. Rotator gear knob .
Many thanks

Originally Posted by HQU

Can anyone confirm the parts numbers for the OEM: camera, microswitch with camera wiring and tailgate loom with camera wiring. I have seen different numbers on this and the UK Disco 3 site with a similar thread. MY12. Rotator gear knob .
Many thanks

Hi there,
Most of the later updates for the part numbers on the Disco3 thread (DISCO3.CO.UK - View topic - D4 XS wiring for rear camera) are from me. It would be worth getting a VIN from someone with a MY12 and factory fitted reversing camera and checking the part number but I would assume based on the research I've done that the part numbers will be (Duckworths prices in brackets):

Tailgate microswitch with camera loom LR021100 (GBP 40)
Analogue camera LR043493 (GBP 182)
Additional tailgate wiring loom LR071911 (GBP 51)
Clips FYC500040 (GBP 9.60 for 6)
and of course the Fakra cable for the front which you've already ordered.

Originally Posted by HQU

(does this reach all the way from the tailgate handle up to the Fakra and power connectors behind the rear courtesy light?).

Yes.

I think that the following will only matter if you're trying to get the curving lines... and not sure it will work. So just fyi if you're feeling like investigating. Copied from the Disco3 thread: "Using a VIN for an MY14 fitted with the factory reversing camera, I checked the camera part number. Some time early in the life of MY14 D4's, the camera has changed from LR023365 (superseded by LR043493) to LR051728- which I assume is the CAN bus connected version... I haven't been able to verify this... "
And finally a question for you too - do you know if you have Fakra connectors on the rear of the head unit? The assumption (statement, actually) on the Disco3 site was that if you have the rotary gear selector then you will have Fakra connections on the head unit.

Hope that helps. Good luck.

David

You can try:

SALLAAAF3CA607139

SALLAAAF3CA629344

SALLAAAF3CA635492

All MY12 HSE's

Originally Posted by rufusking

You can try:

SALLAAAF3CA607139

SALLAAAF3CA629344

SALLAAAF3CA635492

All MY12 HSE's

Thanks Ron, are they with surround camera system or reversing camera only?

David

Topix shows them as non-surround

Still an assumption that it's the Fakra connection on the back of the head unit, rather than the 6 pin plug that has also been mentioned, but a couple of threads on this and the Disco3/4 site seem to point to that for the rotary gear selector (Wiggs on the Disco 3 site - he seems to know what he's talking about looking through his posts on various topics). It'll be like Christmas when I remove the front fascia and have a look, not knowing quite what I'll find! Hoping that it is Fakra but seems like connections can still be made with a bit of wire and connector modifications. Thanks for help.

Sorry - more questions! Can you get the part numbers from Topix with one of the MY12 VINs above. I'm new to that site. Cheers

Originally Posted by HQU

Sorry - more questions! Can you get the part numbers from Topix with one of the MY12 VINs above. I'm new to that site. Cheers

Agree re Wiggs on Disco3 site so with rotary gear knob you should have Fakra connectors. Part numbers actually come from MicroCat. Looks like LR031813 was the original camera but it was superseded by LR043493, so that's the one you want.


David