If you cannot get into settings by pressing the little i button on the end of the indicator stalk then the system has a fault.
Using the i button can you scroll between trip, range, av fuel use, av speed, current time and "settings".
The settings screen will say i exit on the left and enter >>!  !<< on the right.  The >>!  !<< are the forward and back radio controls on the steering wheel.
Using these >>!  !<< buttons you can scroll between each page in the menu.
1.  Trip distance  - km or miles
2.   Fuel Usage - mpg  or l/100km
3.   Outside temp - c or F
4.   Overspeed alarm - set speed
5.   Head lamp delay - secs
6.   Auto door lock  - on or off
7.   Rear Mirror dip on reverse - on or off
8.   Reset to default
To make changes when any of the above menus then you use the radio volume controls - +/- to make the changes.
Before you go trying to make changes using an OBD2 system you need to get the settings system to work first.  If it doesn't work try a hard reset on the computer system (remove battery leads and when removed touch together) - the system will reboot itself and this may fix it - maybe not as well.
Cheers
Garry
				
			 
			
		 
			
				
			
			
				REMLR 243
2007 Range Rover Sport TDV6
1977 FC 101 
1976 Jaguar XJ12C
1973 Haflinger AP700
1971 Jaguar V12 E-Type Series 3 Roadster
1957 Series 1 88"
1957 Series 1 88" Station Wagon
			
			
		 
	
Bookmarks