What happened to your D3/D4 today?

Quote:

---

Originally Posted by PerthDisco

Not mine but this sorry sight 2007 D3 gave me rear and middle air distribution valves (I’ll rebuild) all the height sensors and 3 of the wheel speed sensors for my spares kit.

The mission was to get its Hitachi compressor but on removal found it was an AMK with 2013 date. It’s out and ready for sale if anyone wants a spare PM me and I’ll give you sellers details. Looks as new.

Looking for a working but old Hitachi to rebuild.

I also removed the air tank was as new. Interestingly there’s one line in and out to the tank.

Good practice ripping apart a wreck. Especially when you can cut the air hoses.

https://uploads.tapatalk-cdn.com/202...890cbf23a3.jpg

https://uploads.tapatalk-cdn.com/202...a552ace4fb.jpg

---

Is there much interior trim left in that? I could do with a few replacement parts for mine.

Quote:

---

Originally Posted by PerthDisco

It was a petrol and was crash damaged at front so things like front cv joints etc were cut in half. Gearbox and diff also removed.

It’s a lot easier to remove things when you can be destructive to surrounding parts. Quite therapeutic actually.

Does anyone have an old Hitachi compressor surplus to needs?

---

Actually off the interior is D4 grey, I might be interested in a cargo area from

Hmmm... does the steering wheel have the radio controls on it?

Got the nearly bald scorpion zeros replaced with the second hand Verdes I bought on here a while ago. Added blue tooth tyre pressure monitors to test.
Would like to use them on the boat trailer more then the car.

Put the Tuffants on and loaded the roof for a beach trip.

Booked in for the valve body rebuild on the trans next month.. Getting it vac tested before and after just to identify what was going on if anything.

Will be replacing front LCA bushes when valve body is out. They are well worn.

Going to replace the AC valve aswell.. The cooling delay is getting annoying now.. It's not cheap $246 for a valve!

Quote:

---

Originally Posted by josh.huber

Got the nearly bald scorpion zeros replaced with the second hand Verdes I bought on here a while ago. Added blue tooth tyre pressure monitors to test.
Would like to use them on the boat trailer more then the car.

Put the Tuffants on and loaded the roof for a beach trip.

Booked in for the valve body rebuild on the trans next month.. Getting it vac tested before and after just to identify what was going on if anything.

Will be replacing front LCA bushes when valve body is out. They are well worn.

Going to replace the AC valve aswell.. The cooling delay is getting annoying now.. It's not cheap $246 for a valve!

---

Interestingly had my valve replaced and still have delayed cooling. I’m thinking of replacing my thermo fan as it currently clicks etc. I wonder if it’s a lack of air flow???? No idea

I chucked the gauges on mine. I'm low pressure with low cooling.. Once the compressor ramps up is nice.
I wonder if your delayed cooling is triggered elsewhere, like ambient air temps incorrect? Have you got a throttle booster thingy?

Quote:

---

Originally Posted by PerthDisco

Does anyone have an old Hitachi compressor surplus to needs?

---

I do but it needs a new piston, piston bearing and a new bore. The motor was working fine but I've honestly no idea how much it has worn. Its yours if you want it though!

Quote:

---

Originally Posted by matti4556

Let us know what the new rod ends feel like Peter - its something you seem to get used to over time (the wearing out bit) but Im expecting it will feel a lot better when done? Ball park figure on the rod ends replacement costs too if I may?
Matti

---

parts are $179 per side for rods and ends, say 2 hours of labour to fit.

I'm getting all 4 airstruts replaced at same time plus new tyres, Pirelli Scorpion Zeros so expect it to feel and drive a lot better.

Quote:

---

Originally Posted by PeterOZ

I'm getting all 4 airstruts replaced at same time plus new tyres, Pirelli Scorpion Zeros so expect it to feel and drive a lot better.

---

Peter, can you tell me where you're getting your air struts from please, mine are due (air bags fine, but shocks inside are getting on...)

Roughly when are the airbags due for replacement? Mine is a 2013 with 180k on it. It rides fine but I’ve noticed a very slow leak when the back is loaded overnight