What happened to your D3/D4 today?

Quote:

---

Originally Posted by goldey

Just replaced the front rotors (locally) and picked up the Akebonos (F+R) off Rockauto from the US as well (couldn't find them locally and local Pedders said they couldn't get them in). Best mod/maintenance ive done to the D4 hands down. Was so sick of the dust (and brake shudder). Wouldn't hesitate to use Rockauto for parts (got wipers at the time too) as my LR Indie put me onto them.

---

Awesome. I use rockauto a lot too, only issue is the diesel Disco never made it to the US, so there is nothing available on there engine parts wise

Performed a guided height calibration on the D4 using the GAP tool after changing the rear upper arms. One side was fine, the other was sitting an inch higher. Ran the calibration process and reset the heights at all corners ready for the wheel alignment next week.

How were the bushes in the rear upper arms DJ?

Quote:

---

Originally Posted by Eric SDV6SE

How were the bushes in the rear upper arms DJ?

---

https://uploads.tapatalk-cdn.com/202...2f163cbaa9.jpg
Not completely detached, but not healthy.

Well done. You taking it to Integrity Tyres in Wangara I assume?

Is anyone else having dramas with the "misfueling device" there are two new servos that I've been using, and at least every second tank it sets off the yellow flap in the filler neck. So much so I have the unlock tool in the door pocket next to me? Just me? It's all most at the time I'll smash it with a hammer and a long punch.

Quote:

---

Originally Posted by josh.huber

Is anyone else having dramas with the "misfueling device" there are two new servos that I've been using, and at least every second tank it sets off the yellow flap in the filler neck. So much so I have the unlock tool in the door pocket next to me? Just me? It's all most at the time I'll smash it with a hammer and a long punch.

---

Nup. Only time was when I actually did stick the wrong nozzle in but thankfully didn’t pull the trigger.

Quote:

---

Originally Posted by josh.huber

Is anyone else having dramas with the "misfueling device" there are two new servos that I've been using, and at least every second tank it sets off the yellow flap in the filler neck. So much so I have the unlock tool in the door pocket next to me? Just me? It's all most at the time I'll smash it with a hammer and a long punch.

---

Never in the last 8 years of ownership

Quote:

---

Originally Posted by DiscoJeffster

Nup. Only time was when I actually did stick the wrong nozzle in but thankfully didn’t pull the trigger.

---

Was of no use to me when I DID put the wrong fuel in. Distracted by the lovely timber boat at the next pump

If I put it in really slowly it doesn't do it. But seriously. It happens that much I was going to lubricate the hinges during the next service