 Master
					
					
						Subscriber
					
					
						Master
					
					
						SubscriberMine ended up same. After I had a quick chat to Tim from Traxide, I didn't bother to test it, just recycled the Optima and replaced it with an SSB HVT70D (85Ah) from Goodchilds. It went straight in on the Traxide tray.
I did need a longer +ve lead made (AutoSpark Osborne Park).
Also needed a flatter clamp, purchased a standard one at Repco.
I'm in Wembley. You're welcome to message me and drop by for a look see.
(And I think there's a few threads on this very topic, if you want to see what others have done? Pretty much the same.)
If at first you don't succeed, that's one data point. - xkcd
----------------------------------------------------------------------
2011 Discovery 4 SDV6 HSE
JayTee
Nullus Anxietus
Cancer is gender blind.
2000 D2 TD5 Auto: Tins
1994 D1 300TDi Manual: Dave
1980 SIII Petrol Tray: Doris
OKApotamus #74
Nanocom, D2 TD5 only.
 YarnMaster
					
					
						YarnMaster
					
					
                                        
					
					
						2010 TDV6 3.0L Discovery 4 SE remapped to RRS output, Alaska White, GME XRS-330c, IIDTool BT, Dual Battery, Apple CarPlay, OEM Retrofitted: Cornering lights, Door card lights, Power + Heated Seats, Logic 7 audio
JayTee
Nullus Anxietus
Cancer is gender blind.
2000 D2 TD5 Auto: Tins
1994 D1 300TDi Manual: Dave
1980 SIII Petrol Tray: Doris
OKApotamus #74
Nanocom, D2 TD5 only.
Point of no return, only waiting on the separator plate to be delivered.
MY08 TDV6 SE D3- permagrin ooh yeah
2004 Jayco Freedom tin tent
1998 Triumph Daytona T595
1974 VW Kombi bus
1958 Holden FC special sedan
 Master
					
					
						Master
					
					
                                        
					
					
						I wish I lived in your street Nick., I would be over everyday just to see this stuff.
 TopicToaster
					
					
						Subscriber
					
					
						TopicToaster
					
					
						SubscriberMy mistake was assuming it was obvious where all the check ball bearings went. It turns out there are many more locations than balls. Take photos!!!!
In the end for me I had to look for wear marks on the separator plate to work out where balls had been located based on minuscule wear on the plate. Very unpleasant. Avoid.
2010 TDV6 3.0L Discovery 4 HSE
2007 Audi RS4 (B7)
| Search AULRO.com ONLY! | Search All the Web! | 
|---|
|  |  | 
Bookmarks