
 Originally Posted by 
redfender
					 
				 
				just had a 40k service done including brake pads
$500.00
but now need to work out how to reset the service message
 
any thoughts
 
it was serviced by an independant lr specialist
			
		 
	 
 From the WSM...
 
 
Manual Reset Procedure 
* Press and hold the trip reset button. 
* Turn the ignition switch on to the ignition position II. 
* C. If the SII function is enabled the information display will flash 'SERVICE' for 5 seconds and then display 'SERVICE' constantly. If the SII function is not enabled the information display will show the normal odometer and trip information. 
* D. If the trip reset button is released within 10 seconds of entering the reset mode, the information display will show 'DIST'. If the trip reset button is not released after 10 seconds the instrument cluster will exit the manual reset procedure. 
o If the trip reset button is not released after 10 seconds the instrument cluster will exit the manual reset procedure. 
* E. If the oil service value is to be reset, press the trip reset button within 10 seconds of releasing it and hold for more than 5 seconds. The information display will show 'RST' for 5 seconds and then reset the oil service value, the display will then show ‘END’. 
* F. If the trip reset button is pressed for 5 seconds the display will exit the reset routine. 
* G. If the trip reset button is not pressed for more than 10 seconds, then the information display will exit the reset routine.
				
			 
			
		 
			
				
			
			
				MY21.5 L405 D350 Vogue SE with 19s.  Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
VK2HFG and APRS W1 digi, RTK base station using LoRa
			
			
		 
	
Bookmarks