Thread: 120" extra cab

Progress is slow, self inflicted illness

Holes in rear crossmember filled, no wonder they left the bracket bolted on...hid the damage



Fuel tank mounts





Dummy fit cab to mounts second tank....still thinking...



radiator mounts

The chassis looks good Better than original in the mounts
My second tank is to high so cant use it all
Some things you my think about....... Brackets for the Aux battery,Air tank,compressor and under tray water tanks. May be a storage compartment.

Originally Posted by Rangier Rover

The chassis looks good Better than original in the mounts
My second tank is to high so cant use it all
Some things you my think about....... Brackets for the Aux battery,Air tank,compressor and under tray water tanks. May be a storage compartment.

How does your second tank being high, stop you from using it?

I'm hoping to fit two N70 sized optima's under the seat still....

Just use a portable compressor, will make some brackets for 9kg LPG bottles on one side of the tray, also a storage draw, running from aux tank, through to and out the back, for tools, spares etc and the water tank is still under thought, will need to get one tiged up, not sure whether to go sill, or make a funny shape and surround the aux tank

Keep the thoughts coming though

Cut and shut rear mounty bits, are done



Drivers door panel fit has turned a bit crap, will need to replace the top hinge and see if I can get it somewhere happy, if not lift the roof and move the pillar and repaint.....later

Fuel tank dummied with mounts



and mounts



Mig burn sucks

Mate of mine, made me a present

You mean you got "mates"

when did that Happen ? Did I miss something?



That piece of kit would be an adjustable Panhard Rod, can your mate another one for a Disco at a fee?


P.S BTW the project is coming along really well . KUTGW

Originally Posted by rovercare

Mate of mine, made me a present

Am I looking at an adjustable panhard rod?

If your lifting that thing or fitting pootrol shocks etc and need to raise/ angle the rear shock mounts may be a good time to stick new crush tubes in posi.

Originally Posted by Disco_owner

You mean you got "mates"

when did that Happen ? Did I miss something?



That piece of kit would be an adjustable Panhard Rod, can your mate another one for a Disco at a fee?


P.S BTW the project is coming along really well . KUTGW

Nup, liability and all that

KUTGW?