Page 5 of 7 FirstFirst ... 34567 LastLast
Results 41 to 50 of 63

Thread: Tow ball as a recovery point? The answer is NO !!!

  1. #41
    Join Date
    Jan 1970
    Location
    Eidsvold QLD
    Posts
    2,691
    Total Downloaded
    0
    Quote Originally Posted by Jamo
    Nice photo's Crump!

    But, how did someone manage to get bogged inside your shed??
    The things I do to help out, had to get a jackhammer in to get out of that one.
    The Ugly Duckling-
    03 Defender Xtreme, now reduced by 30%.


    a master of invisibleness.

  2. #42
    Join Date
    Jan 1970
    Location
    Esperance
    Posts
    269
    Total Downloaded
    0
    Wow ...this topic has the potential to go far ...lol...going by the responses to similar topics on the ov*rlander forums
    Having bent the reciever pin on one occaision(carlton cold caused exact details to be lost from memory) i know it can be a PITA to remove (even when sober)
    A grade 8 16mm(i think) hex head bolt with a hole drilled in the end for a split pin is heaps stronger than the supplied pin, or even a grade 10 socket head cap screw will solve the bending pin issue.
    I've seen the corner of a 35 tonne dragline bucket lifted off the ground with a 3.2T bow shackle(accidently...funnily enough the weld on the lifting lug gave way...oops ) ...but also seen the evidence of brocken recovery gear.

    oh.....and dont snatch off a tow ball

  3. #43
    Join Date
    Jul 2003
    Location
    Sydney's gritty inner west (2204) and verdant Mount Wilson
    Posts
    7,445
    Total Downloaded
    0
    Just another thought...

    Many people think that the only way to recover a vehicle is in the direction that the stuck vehicle was travelling...

    contrare

    The best way is to pull the stuck vehicle out the same way it went in...reverse. It has made its way there and could go no further forward so often the easiest way out is the way it went in.

    So a rear to rear recovery is best providing that you don't use the tow ball

    Same principle applies if you go off sideways...how do I know?
    Last edited by one_iota; 29th May 2006 at 09:50 PM.
    Mahn England

    DEFENDER 110 D300 SE '23 (the S M E G)

    Ex DEFENDER 110 wagon '08 (the Kelvinator)
    http://www.aulro.com/afvb/members-rides/105691-one_iotas-110-inch-kelvinator.html

    Ex 300Tdi Disco:



  4. #44
    Join Date
    Jan 1970
    Location
    South Yundreup,WA.
    Posts
    7,468
    Total Downloaded
    0
    Mahn,
    I agree and normally pull out the way it went in. But sometimes that is not possible or practical depending where the recovery vehicle is or is coming from or where you need to go or access to recovery points etc.
    2011 Discovery 4 TDV6
    2009 DRZ400E Suzuki
    1956 & 1961 P4 Rover (project)
    1976 SS Torana (project - all cash donations or parts accepted)
    2003 WK Holden Statesman
    Departed
    2000 Defender Extreme: Shrek (but only to son)
    84 RR (Gone) 97 Tdi Disco (Gone)
    98 Ducati 900SS Gone & Missed

    Facta Non Verba

  5. #45
    Join Date
    Jan 1970
    Location
    Sydney, Northern Beaches
    Posts
    917
    Total Downloaded
    0
    Quote Originally Posted by barney
    i beg to differ GL,
    ...gossies brother in law went to the rescue, hooked his strap onto the newbies recovery point, an ARB hook, shackeled the strap to the back of his van and took off. what they didn't pick up was that the newbie had put his recovery points on, himself. with bolts he picked up for "the right price" at BBC.
    Unfortunately you cannot compensate for stupidity. I should rephrase and say properly fitted towbars, recovery points, hitch receivers and rated shackles should always outlast a recovery strap. If that is not the case .. or you are in doubt .. get it changed!!!

    Metal shrapnel is what kills and causes damage. If proper recovery techniques are being used, a broken strap should cause .. at worst .. a dent in you rear door. The strap should be the weakest point in the recovery setup. That doesn't mean you should use a fragile old strap without a rating ... but if something goes let it be that 9000lb ARB strap cause chances are it won't come through the back door and mess up your comb over!

  6. #46
    Join Date
    Jan 1970
    Location
    Sydney, Northern Beaches
    Posts
    917
    Total Downloaded
    0
    Quote Originally Posted by CraigE
    Mahn,
    I agree and normally pull out the way it went in. But sometimes that is not possible or practical depending where the recovery vehicle is or is coming from or where you need to go or access to recovery points etc.
    I second that hence elec winches are not worth the dollars .. unless you do comp work!

  7. #47
    Join Date
    Feb 2006
    Location
    gosford
    Posts
    824
    Total Downloaded
    0
    I am planning my first trip to Fraser Island later this year and this thread certainly has me thinking. Now I am not planning on getting bogged every 5 min's but as we are going with some other families I will be taking great care as to who I recover and who I will let recover me. I am getting a propper recovery point up front.

    I just can't imagine the pin being that strong. I don't have the experience as some of you here so if you where a novice like me at the back end what's best a proper rated shackle or use the existing pin?

  8. #48
    Join Date
    Jan 1970
    Location
    Sydney, Northern Beaches
    Posts
    917
    Total Downloaded
    0
    In my opinion use a shackle bracket (below) with the existing pin that came with your towbar. The bracket spreads the load on the pin far more effectively then just putting the strap around the pin. Even if the pin is suspect there is very little chance that it will shear or break with this setup. Also, as mentioned before .. I'll cut off my balls if you break a rated 3.2T shackle before the strap breaks!!!



    I've used the shackle bracket on many occassions, there is no evidence of the pin bending or such like. Some action below (notice the vehicle being recovered )



    Bloody Disco's without CDL!!


    Mahn, remember this one?
    Last edited by Greylandy; 30th May 2006 at 12:29 PM.

  9. #49
    Join Date
    Feb 2006
    Location
    gosford
    Posts
    824
    Total Downloaded
    0
    Thanks for posting the pic Greylandie, I like that set up I think thats the way I'll go. Any idea what one should cost me.

  10. #50
    Join Date
    Jan 1970
    Location
    Sydney, Northern Beaches
    Posts
    917
    Total Downloaded
    0
    Quote Originally Posted by ak
    Thanks for posting the pic Greylandie, I like that set up I think thats the way I'll go. Any idea what one should cost me.
    Around $70 ... they are available from ARB and TJM.

Page 5 of 7 FirstFirst ... 34567 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!