Rumaged around and found a respectable 10 spline diff centre to replace my current tired one. Front diff shouldn't whine loudly on over run or be able to move the pinion up and down a lot!!I'll get to it before it goes crunch.
Brian
Rumaged around and found a respectable 10 spline diff centre to replace my current tired one. Front diff shouldn't whine loudly on over run or be able to move the pinion up and down a lot!!I'll get to it before it goes crunch.
Brian
Surprisingly nothing had a big weekend out no breaks nothing nadda hmmm what going to break tomorrow....
Gave the old Disco a wax yesterday. And noticed the paint starting to come away from the roof. Got autobarn mixing up a spray pack with the intention of masking off everything but the roof, sanding and applying fresh paint and clear coat.
Gotta come up with some kind of booth....
Locked the centre diff, did the SLABs wire cut, packed up the back ready for Glenreagh!
Worked out that the reason the near side of the block was covered in oil wasn't the turbo drain gasket, rather the oil filter had come loose!
Got stung by a wasp on my finger too,![]()
Drove it through the middle of Sydney, then through 170KM of winding road.
If you need to contact me please email homestarrunnerau@gmail.com - thanks - Gav.
You weren't on parramatta rd mid morning were you? Passed a clean 101 with trailer going the other way (west).
If you need to contact me please email homestarrunnerau@gmail.com - thanks - Gav.
If you need to contact me please email homestarrunnerau@gmail.com - thanks - Gav.
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks