Page 1 of 3 123 LastLast
Results 1 to 10 of 21

Thread: Shuttle valve

  1. 21st January 2007, 03:13 PM #1
    stevo's Avatar
    stevo
    stevo is offline Wizard Supporter
    Join Date
    Jan 1970
    Location
    Pennant Hills, Sydney
    Posts
    1,415
    Total Downloaded
    0

    Shuttle valve

    Hi,can anyone out there tell me the plug connections for the abs modulator as I want to test the shuttle valve resistance,have been tracking down a fault and with the laptop plugged into the car reading the fault codes and checking the switch outputs have noticed that normally both shuttle valve switches are closed when brakes are applied.

    But every now and again only one will read closed and when this happens I will also get a 11.4 shuttle valve fault when this happens so I want to maybe make up a plug and connect the multimeter in to test the resistance on both sides to see which circuit is playing up.
    disco seriesII mods so far:-bullbar,hyd winch,
    detriot locker,lsd front,C.D.L kit,chipped and bigger intercooler,2" lift,rock sliders, lsd in transfer case, modified auto trans.

    In the event of nuclear war,Disregard this message
    Reply With Quote Reply With Quote
  2. 21st January 2007, 03:36 PM #2
    dmdigital's Avatar
    dmdigital
    dmdigital is offline OldBushie Vendor

    Gold Subscriber
    Join Date
    Jun 2006
    Location
    Arnhem Land, NT
    Posts
    8,492
    Total Downloaded
    0
    Does this help at all?

    What software are you using?
    Attached Files Attached Files
    Last edited by dmdigital; 21st January 2007 at 03:49 PM.
    MY15 Discovery 4 SE SDV6

    Past: 97 D1 Tdi, 03 D2a Td5, 08 Kimberley Kamper, 08 Defender 110 TDCi, 99 Defender 110 300Tdi[/SIZE]
    Reply With Quote Reply With Quote
  3. 21st January 2007, 04:13 PM #3
    stevo's Avatar
    stevo
    stevo is offline Wizard Supporter
    Join Date
    Jan 1970
    Location
    Pennant Hills, Sydney
    Posts
    1,415
    Total Downloaded
    0
    yep thanks,I have ordered a shuttle valve kit pt#SW0500030 and in a couple of weeks will strip it down clean it out and change the switches, there was a bulletin issued in march 2006 about testing and installation instructions will try and find those as well
    disco seriesII mods so far:-bullbar,hyd winch,
    detriot locker,lsd front,C.D.L kit,chipped and bigger intercooler,2" lift,rock sliders, lsd in transfer case, modified auto trans.

    In the event of nuclear war,Disregard this message
    Reply With Quote Reply With Quote
  4. 21st January 2007, 04:33 PM #4
    dmdigital's Avatar
    dmdigital
    dmdigital is offline OldBushie Vendor

    Gold Subscriber
    Join Date
    Jun 2006
    Location
    Arnhem Land, NT
    Posts
    8,492
    Total Downloaded
    0
    Stevo, if you find the bulletin can you post it on forum or e-mail me.

    Cheers
    MY15 Discovery 4 SE SDV6

    Past: 97 D1 Tdi, 03 D2a Td5, 08 Kimberley Kamper, 08 Defender 110 TDCi, 99 Defender 110 300Tdi[/SIZE]
    Reply With Quote Reply With Quote
  5. 21st January 2007, 04:35 PM #5
    ladas's Avatar
    ladas
    ladas is offline ChatterBox
    Join Date
    Jan 1970
    Location
    Kyabram, VIC 3620
    Posts
    2,544
    Total Downloaded
    0
    Quote Originally Posted by stevo View Post
    yep thanks,I have ordered a shuttle valve kit pt#SW0500030 and in a couple of weeks will strip it down clean it out and change the switches, there was a bulletin issued in march 2006 about testing and installation instructions will try and find those as well
    May I ask where you ordered the kit from - and how much ?
    Reply With Quote Reply With Quote
  6. 21st January 2007, 04:38 PM #6
    Bytemrk's Avatar
    Bytemrk
    Bytemrk is offline ForumSage Silver Subscriber
    Join Date
    Oct 2003
    Location
    Montrose, Vic.
    Posts
    5,417
    Total Downloaded
    0
    I think there may be quite a few of us interested in the outcome of this one Steve..

    Mark
    Mark

    Of all the things I've lost, I miss my mind the most

    2015 TDV6 D4.... the latest project... Llams, Traxide, Icom 455, Tuffant Kimberleys and Mofos.... so far.
    2012 SDV6 SE D4 with some stuff... gone...
    2003 D2a TD5...gone...
    2000 D2 V8...gone...
    https://bymark.photography

    Reply With Quote Reply With Quote
  7. 21st January 2007, 05:32 PM #7
    stevo's Avatar
    stevo
    stevo is offline Wizard Supporter
    Join Date
    Jan 1970
    Location
    Pennant Hills, Sydney
    Posts
    1,415
    Total Downloaded
    0
    I ordered the kit from british4wd,just over $100 I am trying to get some more info there is someone who say's he had about 90% success drilling out some ports behind the shuttle valve but not keen on doing this till I know what it is for,I have looked at the schematic's for the modulator and it is easy to follow what happens inside.

    I will take pic's when I pull it to bit's will not be next weekend for one reason a long weekend plus want to chase up some more info
    disco seriesII mods so far:-bullbar,hyd winch,
    detriot locker,lsd front,C.D.L kit,chipped and bigger intercooler,2" lift,rock sliders, lsd in transfer case, modified auto trans.

    In the event of nuclear war,Disregard this message
    Reply With Quote Reply With Quote
  8. 21st January 2007, 08:03 PM #8
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is offline RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,495
    Total Downloaded
    0
    Can I get a copy of the info as others have previously requested, and pics please mate...
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
  9. 22nd January 2007, 09:31 AM #9
    stevo's Avatar
    stevo
    stevo is offline Wizard Supporter
    Join Date
    Jan 1970
    Location
    Pennant Hills, Sydney
    Posts
    1,415
    Total Downloaded
    0
    here is some web address www.nettechy.com/LRabsBulletin.pdf and also this one wwwrobisonservice.com/articles/ABS.pdf
    disco seriesII mods so far:-bullbar,hyd winch,
    detriot locker,lsd front,C.D.L kit,chipped and bigger intercooler,2" lift,rock sliders, lsd in transfer case, modified auto trans.

    In the event of nuclear war,Disregard this message
    Reply With Quote Reply With Quote
  10. 22nd January 2007, 10:30 AM #10
    BradM's Avatar
    BradM
    BradM is offline Master
    Join Date
    Jan 2007
    Location
    Karratha WA
    Posts
    369
    Total Downloaded
    0

    Question British 4 Wheel Drive WebSite

    Hi,
    Does British 4 Wheel Drive have a Website? My DII MY2003 built October 2002 by coincidence is going into the LR Dealer next week to have the ABS/TC/HD Lights coming on intermittantly fault fixed. First time it happened last week the fault codes indicated a shuttle valve problem.

    How does someone get hold of the software and serial port interface for Laptop to Disco for doing maintenance. As you guys already know you cannot even bleed to brakes (ABS) unit without opening the valves in it with the software.

    As my Disco is a long term investment so the software would be very usefull.
    Reply With Quote Reply With Quote
Page 1 of 3 123 LastLast
« Which brake pads? | D1 clock removal »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!