tow points on 89 rr

**Pedro_The_Swift** · 6th November 2007, 06:47 PM

I am gunna jump off a tall building here,
and say there could be a few people on here that could splice rope,,,

EDIT;[after reading streakys post,,

]

ok then

streaky · 6th November 2007, 06:57 PM

Here you go then...knock yer self out!

1) Closed
2) Expanded
3) Contracted.

Anyone familiar with splicing the Plasma/Dyneema ropes should be able to do these.

Good luck.

S.

**Cap** · 6th November 2007, 08:32 PM

On my recovery over the weekend we used a snatch strap into the tow bar hole and put the pin through it. There was some huge loads on (draging the hilux forward on the winch) and didnt even bend the pin.

**HangOver** · 6th November 2007, 09:07 PM

I think tow & winch would be fine its when you start putting a snatch strap on trying pull very stuck vehicles it may come to problems BUT i dont have one of these bars with a pin so cant say

comments anyone?

**strangie** · 6th November 2007, 09:21 PM

I would have to say that towing/winching would have to be o.k. as thats what the pin does when the tow ball is fitted and you are towing a trailer? just my 2 cents.

**Dougal** · 7th November 2007, 04:44 AM

Originally Posted by BigJon

I'm with you. I can't imagine what sort of forces you would be exerting to bend the pin.

It takes less to bend the pin than it does to shear off a towball.

Just because you get away with something, doesn't make it sound practise.

**Dougal** · 7th November 2007, 09:54 AM

Originally Posted by strangie

I would have to say that towing/winching would have to be o.k. as thats what the pin does when the tow ball is fitted and you are towing a trailer? just my 2 cents.

The loading on the pin is very different between holding a single rope and holding a square receiver in place.

The same pin is about 8 times stronger holding a reciever than it is with a rope or strop pulling on it's centre.

Thread: tow points on 89 rr

Thread Tools

Bookmarks

Bookmarks

Posting Permissions