Page 2 of 2 FirstFirst 12
Results 11 to 18 of 18

Thread: 3 Amigos

  1. #11
    Join Date
    Jan 2007
    Location
    Karratha WA
    Posts
    369
    Total Downloaded
    0

    The Dreaded 3 Lights HD/TC/ABS

    Jessa, if you find someone up here let me know too. If I do I will let you know.

    BradM

  2. #12
    Jezza the Geo Guest

    Another possible solution

    I just got them this morning!!! Dammit!

    Anyway, I found another possible fix on an American site - Find a steep driveway somewhere and put the vehicle into low range and 1st gear, and turn on HDC so that it activates the ABS modulator and gets it "working".

    Most vehicles suffer from the shuttle valve jamming on the ABS modulator simply from lack of use.

    I'll try that this afternoon.

  3. #13
    Jezza the Geo Guest
    Thanks - not much hope there! The local crowd have been notorious for many, many years, even back to the time when I bought my S111!

  4. #14
    Join Date
    Jan 2007
    Location
    Karratha WA
    Posts
    369
    Total Downloaded
    0
    Go down to the beach and drive around in the sand without the CDL locked (if you have a CDL lock) it will do the same thing and work out the TC (ABS unit) big time.

    Best of luck as an ABS modulator replacement unit is thousands of dollars and you need a diagnostic unit to be able to bleed the ABS system properly when you replace it.

    I hope it is only a sensor. What year Disco do you have?

    BradM

  5. #15
    MickS Guest
    Quote Originally Posted by Jezza the Geo View Post
    I just got them this morning!!! Dammit!

    Anyway, I found another possible fix on an American site - Find a steep driveway somewhere and put the vehicle into low range and 1st gear, and turn on HDC so that it activates the ABS modulator and gets it "working".

    Most vehicles suffer from the shuttle valve jamming on the ABS modulator simply from lack of use.

    I'll try that this afternoon.
    Watching with interest..

  6. #16
    Join Date
    Feb 2004
    Location
    Williams West Aust
    Posts
    20,998
    Total Downloaded
    0
    Ive got a secondhand sensor now.
    Will fit over the weekend.Will let you know how it goes.
    Andrew
    DISCOVERY IS TO BE DISOWNED
    Midlife Crisis.Im going to get stuck into mine early and ENJOY it.
    Snow White MY14 TDV6 D4
    Alotta Fagina MY14 CAT 12M Motor Grader
    2003 Stacer 525 Sea Master Sport
    I made the 1 millionth AULRO post

  7. #17
    Jezza the Geo Guest
    Let's know how you go - I have brake squeal, which I think may be from dust or non-genuine pads, so that points in the direction of a simple fault (fingers crossed). One of the sensors appears to be new, so I think that someone's been here before me. . . Let's see what the dealer's warranty is like.

  8. #18
    Join Date
    May 2003
    Location
    On The Road
    Posts
    30,031
    Total Downloaded
    0
    if the sensor is new-- there will be no two pin connector between the sensor and abs/module
    "How long since you've visited The Good Oil?"

    '93 V8 Rossi
    '97 to '07. sold.
    '01 V8 D2
    '06 to 10. written off.
    '03 4.6 V8 HSE D2a with Tornado ECM
    '10 to '21
    '16.5 RRS SDV8
    '21 to Infinity and Beyond!


    1988 Isuzu Bus. V10 15L NA Diesel
    Home is where you park it..

    [IMG][/IMG]

Page 2 of 2 FirstFirst 12

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!